Power Vision PV2 help!
Thread Starter
|
Cruiser
Joined: Mar 2012
Posts: 123
Likes: 1
From: Prague, Czech Republic
Power Vision PV2 help!
Hi, I have recently switched from '09 FLHTP to '14 FLHR, so I am in need of a new cable for my Power Vision.
I know that the cable is only different on the bike connector side.
I have 6-pin Deutsch connector, but cannot find any info on pinout.
There are 4 wires in the cable red, black, white and green.
Please, anyone with the PV2 cable, can you take a look what colour goes to what pin?
Your help is MUCH appreciated!
I know that the cable is only different on the bike connector side.
I have 6-pin Deutsch connector, but cannot find any info on pinout.
There are 4 wires in the cable red, black, white and green.
Please, anyone with the PV2 cable, can you take a look what colour goes to what pin?
Your help is MUCH appreciated!
Cruiser
Joined: May 2012
Posts: 125
Likes: 0
From: Garner, NC
I see that you are in Prague, so I don't know how hard or easy it is to order things into the country, but seems as it would be easier to just order the cable. I had to do that for my PV when my wife got a 2013 Softail Slim. I got mine from Fuel Moto for $25 I beleive.
Thread Starter
|
Cruiser
Joined: Mar 2012
Posts: 123
Likes: 1
From: Prague, Czech Republic
I know about tune license, no problem here. It is really difficult to get stuff from US shipped here. The cable is 24.95, right, but with shipping and customs it is much more expensive.
It is only 4 wires to connect and I do have a connector here.
Please help me out guys!
It is only 4 wires to connect and I do have a connector here.
Please help me out guys!
Thread
Thread Starter
Forum
Replies
Last Post
