curious ,hours
Denco----SE hydraulic cam plate & Hi flow oil pump
Quick Install push rod kit
99-06 T/C inner cam bearing
cam bearings
roller bearings
fuel filter kit
TC cam spacer
Labour 8 hours on a 2003 Electra Glide Classic with 60,000 kms.. I also went out to Jarz and picked up the Baisley pressure relief piston and spring and had Denco change the SE one for this.
Quick Install push rod kit
99-06 T/C inner cam bearing
cam bearings
roller bearings
fuel filter kit
TC cam spacer
Labour 8 hours on a 2003 Electra Glide Classic with 60,000 kms.. I also went out to Jarz and picked up the Baisley pressure relief piston and spring and had Denco change the SE one for this.
Curious, hours
Harley has a manual which tells the mechanic how long something should take, that is usually how most shops give you the labor cost. Most HD shops follow it even if the process is done in less time.
Ultimate HDF Member
Joined: Mar 2012
Posts: 6,129
Likes: 143
From: Santa Cruz
Flat rate to replace cam support bearing/cams/secondary cam chain/tensioner is 4.3 hours. Cam bearings would add about .4.
http://www.allbookez.com/pdf/l6hwp/
http://www.allbookez.com/pdf/l6hwp/
Elite HDF Member
Joined: Nov 2013
Posts: 4,377
Likes: 646
From: Santa Clarita
For a guy not accustomed to this work, I think it safe to double the factory flat rate... Also, if you get the adjustable pushrods, you can easily knock an hour plus off the time. When and if I do this job (will probably have my Indy do it) I'll get adjustables...
Thread
Thread Starter
Forum
Replies
Last Post
