Electric reverse
Electric reverse
I see electric reverse is available on the 2014 Freewheeler. Is it also available on the Ultra Tri-Glide? If so, can someone post a pic of the hand controller? (Ultra model) I'd like to see how they've integrated it into the hand controls. Also, anyone know if the parts can be fitted onto a two wheel model? My short legs and the 900 lbs of the CVO Limited have me at least considering reverse options. I'm not a huge fan of the kits that require you to reach down to the tranny to throw a lever. A simple, hand operated reverse assist would be the perfect set up.
Tourer
Joined: May 2014
Posts: 251
Likes: 4
From: San Diego
With the engine running and in neutral you press the 'R' button until the orange light on the rh clock appears, let go of the 'R button then press again and you will go backwards.
I have found sometimes when I have finished reversing the linkage/clutch on the electric moor has stuck and the trike won't move forward on an incline. Usually I select 1st and I give it a few more revs to go forward otherwise it stalls.
Red & green buttons are for the Klicktronic gear shift
I have found sometimes when I have finished reversing the linkage/clutch on the electric moor has stuck and the trike won't move forward on an incline. Usually I select 1st and I give it a few more revs to go forward otherwise it stalls.
Red & green buttons are for the Klicktronic gear shift
Last edited by CaCruizin; Sep 19, 2014 at 02:31 PM. Reason: forgot the pic!
Road Warrior
Joined: Sep 2009
Posts: 1,267
Likes: 6
From: Northern Michigan
The elect reverse is actually standard equipment on the TriGlide and FreeWheeler, each has different handelbar control configuration unless the newer Ultras have changed to what I see on the FreeWheeler. The mechanics of it (ie: motor and drive ring/gear )cannot be retrofitted to a two wheeler. You will need to look for aftermarket suppliers.
Last edited by icebite1; Sep 19, 2014 at 02:55 PM.
Cruiser
Joined: Sep 2006
Posts: 103
Likes: 0
From: Kamiah, ID
I don't think you can put the Tri-Glide reverse on your CVO. Baker makes a system that is handle bar mounted and is a geared reverse. It is not cheap. I put a Champion reverse on my dads 2006 Ultra trike and he had a hard time reaching down on the right side and putting it into gear.
Outstanding HDF Member
Joined: Aug 2005
Posts: 2,334
Likes: 107
From: Santa Clarita, So. Cal. & Bullhead City, Az.
I've had an '09 Tri-Glide, now a '15 Freewheeler and I can count the number of times I've used the reverse on 1 hand, and half of those times was to see if it really worked. After nearly 50 years on Harleys I don't park where I have to back up. I would think reverse on a 2 wheeler would be kind of hard to control.
Tourer
Joined: Sep 2013
Posts: 353
Likes: 100
From: Wisconsin/Florida
In my case it would be an accident waiting to happen.
Trending Topics
Advanced
Joined: Aug 2014
Posts: 54
Likes: 1
From: Canada
The HD (trike) reverse is stupid fast for reverse. It would be scarey using it on a 2 wheeler. On a Gold Wing, the reverse is about the right speed for a 2 wheeler, very very slow and easy to control, but makes it forever to back up on a GW trike.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Stage III
Joined: Aug 2014
Posts: 3
Likes: 0
From: USA
2011 Triglide Reverse not working
I'm in the middle of troubleshooting the problem. The diagnostics says to remove the Reverse Control Module and test to see if the handle bar light, lights up when jumped past the RCM, if it does then replace the RCM. Then there's a list of tests for the switches and other components in the circuit. Then it has a list of diagnostics that are to do a bench test of the reverse drive motor that are almost identical to the starter bench test. That's the point I'm currenty at. This info is available in the Triglide Supplement available from your dealership. I strongly recommend you have this done by a trained tech. There are a number of circuits that need to be checked on the reverse motor and it's operational components that need to be tested and done properly to insure we get a accurate diagnosis of what has failed. The cellinoid has push, hold, and retract circuits that need to be tested properly. See service manual for complete details. Not for your average shade tree, or do it yourself operations guy.
As a sidebar the system draws power from one source when the engine isn't running and the fuel pump circuit when it is. Check all your fuses and breakers before doing anything. When and if you need to pull the Reverse motor make sure to disconnect your battery if you want to keep all your fingers just the way they are.
As a sidebar the system draws power from one source when the engine isn't running and the fuel pump circuit when it is. Check all your fuses and breakers before doing anything. When and if you need to pull the Reverse motor make sure to disconnect your battery if you want to keep all your fingers just the way they are.
Seasoned HDF Member
Joined: May 2012
Posts: 32,934
Likes: 36,032
From: Carlsbad, CA
But, I can still see how this may be too fast for a 2 wheeler.