When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My bike was still on the lift and I had the center jack under the frame and had the rear wheel hanging free.
I had my bike with the rear wheel hanging free and I even preloaded it all the way so that the shock would push the rear wheel down.
I couldnt get in there.
To route the cables safely on the sides of the fender to make sure it'd never get touched and would be durable... I had to take the fender off.
Well either way, jobs done haha.
It's a great rear light bar.
Where there's a will, there's a way. Mine isn't coming loose. I used 3m tape clips on the inside of my fender and ran the wires through flexible black tubing. I have both of their light bars, but used the shorter run/run light.
This is sort of the setup I want, seems like a stock Euro plate holder
Found another pic from here but 3 years ago
Ebay cheapo poster said
You can get the parts from Harley, they are on the fische here
Diagram Part #12 (73504-11) is probably the one you are looking for in the pictures, just to get the license plate light. You can see the picture a few posts above where I have the Canadian license plate mount, but the diagram part #11 (73403-11A) which has the tail light as well. You will need to source a connector as well.
DOH !!
I saw the back of the bike & (to me) it was the same paint job, did not even notice the name was different lol
I thought it was b4 you put the gas caps on
EDIT: I even saw the Florida plate & did not think you were from FLA
DOH !!
I saw the back of the bike & it is the same paint job, did not even notice the name was different lol
I thought it was b4 you put the gas caps on
That is a VERY different paint job than Rayearth haha.
I can see the similarities though.
No, the Fatboy comes with forward floorboards. I do not know if there is a kit to change to mid or peg controls. Also, the Fatboy does not come with a heal shifter.
Just registered
Picked up, in the last couple of weeks, a 2019 Softail Fatboy FLFBS 114 and absolutely love it.
Previous owner obviously had it set up for touring.
From what I can make out it has:
HD Touring Screen;
HD 16" Apehangers (right down my street );
HD Electronic Cruise Control;
Vance & Hines Eliminator 300 Slip-ons;
HD Hammock Seat with Rider Backrest;
HD Luggage Rack and Pillion Backrest.
Already got a few ideas about putting my stamp on it - watch this space!
Last edited by Urban Gorilla; Oct 17, 2022 at 06:07 AM.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
);
