BT2180 Help
Thread Starter
|
Cruiser
Joined: Jul 2013
Posts: 125
Likes: 2
From: Auburn NY 13021
BT2180 Help
So I tore a surround on my ARC Moto 062's, after repair I started noticing some threads on polarity since the 602's aren't marked. Doing the aa battery test mine are wide post positive, narrow post negative. Which brings me to my current dilemma. Amp is a BT2180 .Does anyone know what the Voltage DC should measure on the speaker wires coming out of the amp. Mine measure:
LF -.5
RF -2.0
LR -.5
RR -2.0
Yes all negative readings which means the polarities are reversed coming out of amp??? So in theory if these are reversed I am basically hooking up my speakers reversed???
Also why would the lefts measure less than the rights????
LF -.5
RF -2.0
LR -.5
RR -2.0
Yes all negative readings which means the polarities are reversed coming out of amp??? So in theory if these are reversed I am basically hooking up my speakers reversed???
Also why would the lefts measure less than the rights????
Outstanding HDF Member
Joined: Jan 2014
Posts: 2,482
Likes: 239
From: Minnesota
Thread Starter
|
Cruiser
Joined: Jul 2013
Posts: 125
Likes: 2
From: Auburn NY 13021
So I followed the video, helped tremendously. As I increased volume my values went up and lost the "negative DC readings" Not that i was try to adjust input gains, I was just very confused why I was getting negative DC readings, forcing me to believe I was getting reversed polarity readings. I never thought a 12 volt system would take AC readings. The only explanation for "my theory" would be the BT Titan amp outputs were reversed which I suspect would have been highly unlikely. I like to test and experiment but my mistake here. Thank You In The Wind !!!!
Thread
Thread Starter
Forum
Replies
Last Post
