B codes
Thread Starter
|
Seasoned HDF Member
Joined: May 2018
Posts: 5,814
Likes: 7,142
From: Las Vegas
B codes
2019 SGS
I had the Rockford amp, front speakers and rear speaker kit installed at Black Hills Harley during Sturgis this year. Just finished an oil change, and while resetting the distance since service on the GTS, I checked for DTC's and found 4 of them. All are for the 4 speakers being open.
B133800
B134200
B134600
B350000
I did some searching and found nothing. System sounds fine. What do I do here? I don't know squat about this stuff. I cleared the codes, but they came back.
I had the Rockford amp, front speakers and rear speaker kit installed at Black Hills Harley during Sturgis this year. Just finished an oil change, and while resetting the distance since service on the GTS, I checked for DTC's and found 4 of them. All are for the 4 speakers being open.
B133800
B134200
B134600
B350000
I did some searching and found nothing. System sounds fine. What do I do here? I don't know squat about this stuff. I cleared the codes, but they came back.
Grand HDF Member
Joined: May 2014
Posts: 3,814
Likes: 1,168
From: florida
do nothing, the hu unit not detecting a load. you might be able to add a resistor in the line between the HU and the amp, but i think it's more work just to keep the codes away. know what they are and why they are there and don't worry about it.
m
m
Thread Starter
|
Seasoned HDF Member
Joined: May 2018
Posts: 5,814
Likes: 7,142
From: Las Vegas
OK, thanks, I understand My do nothing level reached professional quite a while ago.
Thread
Thread Starter
Forum
Replies
Last Post
