The Official 2014 audio upgrade thread
i ordered my magic box online while i was at work, i waited until cycle sounds opened to confirm they recieved my order and the lady confirmed they got the order and assured me it would be sent that day. next day i got tracking number and recieved the part 3 days later.
i called cycle sounds while i was instalilng the magic box last night because i had a couple questions and the guy was happy to help. very good customer service from my expirence.
if your thinking about getting an amp and speakers and the HU requires a flash just get the magic box and be done with it. took all of 5 minutes to hook everything up.
please stop by the big J&M audio trailer while you are in Laconia ,,,, I would like to compare with you the magic box along side the J&M ROKKER XX StreetGlide & Ultra ,,,,
JMJOHN,,,, www.Jmcorp.com ,,,, send email direct to John@Jmcorp.com for your HD-Forums VIP Discount Promo Code.
Keep in mind I'm all in at $400
Please let us know how your system compares to the J&M stuff. As of right now I want to install everything you have. I have no problem spending $400 for a stereo system that I really enjoy, but it better be very impressive at their prices..
not a problem ,.,,, we will use the exact same music source for both bikes for a good comparison ,,,,
looking forward to your arrival ,,, the BIG J&M Audio trailer is set up right now in the Harts Turkey Farm vendor lot, right next to Laconia HD in Meredith NH 03255 ,,,,
my 2014 StreetGlide in on display with the 500w ROKKER XTP amplifier, 6.65" ROKKER XXs in the fairing and lower speaker position, and ROKKER XX 5X7" speakers in the saddlebag lids ,,,,,,,,
radio flashed from Harley as "NO-AMP 4-SPEAKERS ACTIVATE FADE CONTRL" ,,,,,, all DSP work done inside the J&M ROKKER XTP amplifier ,,,,,,
we pulled all that out and sent him over to the HD dealer to get the Harley radio flashed back to stock, which is NO AMP 2 SPEAKERS on the Harley computer selection menu ,,,,,
well ,,,, the dealer either did not flash it correctly or did not want to, because the sound was still very low in volume, just like a 2014 CVO Ultra, when you pull the boom amplifier ,,,,,,,
so I spent about an hour on the bike with my laptop and developed an alternate ROKKER XTP DSP program to use in our amps, for Harley radios that have been flashed for the boom-audio amp, but then the amp has been removed ,,,,,,
ROKKS just the same as our current DSP download for our amps using radios with the stock Harley flash ,,,,,,,
sorry for the long winded complication ,,,,,,,,, but for those who need this new J&M ROKKER XTP DSP Download, send email to john@jmcorp.com ,,
The Best of Harley-Davidson for Lifelong Riders
If in your shoes, I'd wait for BT.. it won't be long now...




