Need A Different Height on Windshield...
Cruiser
Joined: Oct 2007
Posts: 157
Likes: 0
From: C.C.,TX
RE: Need A Different Height on Windshield...
Hi
I have an 03 WG and am using the QD windshield with the newerspring loaded clamps.You can drop the windshield down so that the upper set of clamps set just above the lower triple tree. Then with a grease pencil mark around the headlamp and cut out that part of the windshield with a small diegrinder or dremel tool. that's a lot easier than triming the top. It will drop the windshield about 2 in.
grumpy
I have an 03 WG and am using the QD windshield with the newerspring loaded clamps.You can drop the windshield down so that the upper set of clamps set just above the lower triple tree. Then with a grease pencil mark around the headlamp and cut out that part of the windshield with a small diegrinder or dremel tool. that's a lot easier than triming the top. It will drop the windshield about 2 in.
grumpy
Cruiser
Joined: Sep 2006
Posts: 121
Likes: 0
From: Hershey, PA
RE: Need A Different Height on Windshield...
ORIGINAL: voyager1
Memphis Shades I have talked to.. they were to lazy to help me get a lower shield for my bike. they have zero tech support. One sorry company to talk to,i must say .
Memphis Shades I have talked to.. they were to lazy to help me get a lower shield for my bike. they have zero tech support. One sorry company to talk to,i must say .
As was indicated, I would call a local glass company. I have hadplexiglass/lexan cut a couple of times for doors and they did a great job. Good luck
Road Master
Joined: Sep 2007
Posts: 929
Likes: 0
From:
RE: Need A Different Height on Windshield...
When I got my Memphis Shades from a local shop, they had a measuring windshield with all of the sizes cut on it that you could hold on your bike and then pick the right size.
I recently stripped out a nut on my mounting bracket and when I called them, they sent me a packet of replacements with no questions asked - great service!
I recently stripped out a nut on my mounting bracket and when I called them, they sent me a packet of replacements with no questions asked - great service!
Road Warrior
Joined: Nov 2005
Posts: 1,877
Likes: 4
From: Houston
RE: Need A Different Height on Windshield...
Voyager
Sorry to here that you had a bad experience with Memphis Shades, They have been nothing but stellar for me. They took extra steps, sent extra parts, and went out of their way to suggest some work arounds for an unusual mod... I highly reccommend them.............
[IMG]local://upfiles/5572/CC4C9EA192FB4BD1AD1071C5D3621724.jpg[/IMG]
Sorry to here that you had a bad experience with Memphis Shades, They have been nothing but stellar for me. They took extra steps, sent extra parts, and went out of their way to suggest some work arounds for an unusual mod... I highly reccommend them.............
[IMG]local://upfiles/5572/CC4C9EA192FB4BD1AD1071C5D3621724.jpg[/IMG]
Thread Starter
|
Tourer
Joined: May 2006
Posts: 383
Likes: 1
From:
RE: Need A Different Height on Windshield...
I think I'll call a few glass companies, I have already mounted it on the lowest part of the forks that it can go and its still to high. Thanks for the replies 
Thread
Thread Starter
Forum
Replies
Last Post
