Look at what I did for mine. I used 2" Rush baffles, cut off one end, installed a reducer, welded 3" reducers on the other end to fit ID of stock cans. The baffles themselves are about $60, and the reducers are about $20. I left the packing alone, baffles slide right in. It sounds absolutely incredible, and it performs well, too.

 

My friend has an o3 super glide he says can't get the baffles out. Says they're stuck. I think it's skill level, but just in case, is there anything special I need to know about this model, or is he just a meatball? I've done this before on sportys, and I just wanna be 100% sure. I'm 99.9% sure it's because he's a meatball, but I just gotta ask. Thanx.

 

Well if he can't reach in with pliers or vice grips, he will need to remove the slip-on part of the mufflers and band them out somehow from the other end. I jus placed a piece of 2x6 on the ground and shook mine out, but I don't have a superglide, my exhaust is a supertrapp. Still the meathod should work.