D&D factcat on a Dyna mounting question...

Reply Subscribe

Thread Tools

Search this Thread

Oct 23, 2010 | 11:42 PM

DR. V-TWIN

Thread Starter

Former Sponsor

Joined: Jan 2009

Posts: 19,364

Likes: 40

From: Los Angeles, CA

D&D factcat on a Dyna mounting question...

I am mounting a fatcat on a Dyna. Does the front exhaust bracket on the bike go under or over the bracket on the head pipe? they are line up exactly even right now and I am not sure. I am thinking the head pipe bracket foes on top. Please let me know if you know.

thanks!

Drew

Oct 24, 2010 | 02:21 AM

sigmoid

Cruiser

Joined: Jan 2008

Posts: 114

Likes: 0

From: Bellevue, WA

I mounted mine with the pipe bracket under the one on the bike. Haven't had any problems with it so I assume it's correct.

Oct 24, 2010 | 09:44 AM

mentor70

Road Warrior

Joined: Dec 2006

Posts: 1,530

Likes: 0

From: Diamond Bar, California

Yep, under

Oct 24, 2010 | 10:13 AM

DR. V-TWIN

Thread Starter

Former Sponsor

Joined: Jan 2009

Posts: 19,364

Likes: 40

From: Los Angeles, CA

Thanks guys!

Oct 24, 2010 | 07:59 PM

DR. V-TWIN

Thread Starter

Former Sponsor

Joined: Jan 2009

Posts: 19,364

Likes: 40

From: Los Angeles, CA

It went under The stock gaskets were too thick and made it really tough to get the pipe in the ports. Go figure.

Drew

Oct 24, 2010 | 09:49 PM

rounder

Ultimate HDF Member

Joined: Oct 2007

Posts: 7,562

Likes: 11

From: Palm Harbor fl.

Quote:

Originally Posted by DR. V-TWIN

It went under The stock gaskets were too thick and made it really tough to get the pipe in the ports. Go figure.

Drew

D&D is made for the SE flat style gasket. For a good seal get some copper high temp gasket maker and the SE or other flat gaskets. Install gasket and run a ring of sealant around the gasket then install headers. also run a ring around where the pipe meets the collector. Best way to get a good seal the first time.