FLD Floor Boards
Tourer
Joined: Jan 2012
Posts: 415
Likes: 2
From: Wichita Falls, Texas
Dyna floorboards inexpensive
Really like the looks of the HD floorboards on the bikes.
Not trying to jack your thread. Just want to present a cheaper alternative. Some of us need to pinch pennies to make our mods.
Here is what I did to get floorboards with forwards on a Dyna:
(a little over $200)
https://www.hdforums.com/forum/dyna-...en-that-2.html
Not trying to jack your thread. Just want to present a cheaper alternative. Some of us need to pinch pennies to make our mods.
Here is what I did to get floorboards with forwards on a Dyna:
(a little over $200)
https://www.hdforums.com/forum/dyna-...en-that-2.html
Road Captain
Joined: Apr 2012
Posts: 503
Likes: 0
From: New Mexico
I'm running an 08 superglide with mid controls. Here's the list I got to switch to FLD floorboards and controls (all OEM):
#50621-06... floorboards...................... $128.00
#54173-12... left rear support............... $52.72
#54174-12... left front support............... $68.75
#54165-12... right rear support.............. $52.72
#54172-12... right front support............. $68.75
#38157-12... break lever asy................. $111.00
#38160-12... cap, foot break lvr............. $10.95
#38161-12... push rod, break................. $72.56
#42665-03... shaft, pivot, break pdl........ $11.50
#34887-06... shifter rod......................... $23.00
#33789-12... weldment-inr gear shift lvr.. $66.95
This list doesn't include nuts, bolts and gaskets but all the big buck items are there. Total conversion price with my labor was quoted at just under $800. After market setup to accomplish the same looks like it runs about $425.00. Wyatt's floorboards have been suggested and look pritty good. Hope this helps. best of luck.
#50621-06... floorboards...................... $128.00
#54173-12... left rear support............... $52.72
#54174-12... left front support............... $68.75
#54165-12... right rear support.............. $52.72
#54172-12... right front support............. $68.75
#38157-12... break lever asy................. $111.00
#38160-12... cap, foot break lvr............. $10.95
#38161-12... push rod, break................. $72.56
#42665-03... shaft, pivot, break pdl........ $11.50
#34887-06... shifter rod......................... $23.00
#33789-12... weldment-inr gear shift lvr.. $66.95
This list doesn't include nuts, bolts and gaskets but all the big buck items are there. Total conversion price with my labor was quoted at just under $800. After market setup to accomplish the same looks like it runs about $425.00. Wyatt's floorboards have been suggested and look pritty good. Hope this helps. best of luck.
Thread
Thread Starter
Forum
Replies
Last Post
