FML and the connectors under the neck
Thread Starter
|
Road Warrior
Joined: May 2006
Posts: 1,535
Likes: 42
From: Bossier City, LA
FML and the connectors under the neck
It's been a while since I've changed anything on my bike and I forgot what a PITA taking apart the connectors for the hand controls can be. Without fail, there is always one pin that won't come out the way it should. Even better is my left grip won't come off the bars I sold and I'm shipping out tomorrow. Ok I'm done.
Tourer
Joined: Nov 2010
Posts: 305
Likes: 1
From: Fairmont West Virginia
I had some luck with my grips last time. Try getting a small screw driver under it and then remove it and put the straw of a wd40 can in there, spray a little. Might have to do that in a few spots around the grip. Work it some and it SHOULD come right off. Good luck.
Outstanding HDF Member
Joined: Sep 2010
Posts: 2,357
Likes: 8
From: Pa
What kind of grips? I have kuryakyn ISP grips and did the wd40 trick. And it didn't work. Even tried carb carb cleaner. Nothing
Trending Topics
Thread Starter
|
Road Warrior
Joined: May 2006
Posts: 1,535
Likes: 42
From: Bossier City, LA
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Thread Starter
|
Road Warrior
Joined: May 2006
Posts: 1,535
Likes: 42
From: Bossier City, LA
Got it done. I ended up cutting the grip right against the collar and then was able to pry it off. It's cut in the seam and I don't think you'll be able to tell once it goes back against the hand controls. Thanks for the advice.
