What did I do wrong - Clutch
Road Captain
Joined: Mar 2010
Posts: 676
Likes: 2
From: Glendale, AZ
Um...he said in the text that the cover was upside down dude....
Advanced
Joined: Apr 2012
Posts: 92
Likes: 0
From: long island, ny
OK.. so I put the clutch cable adjust way back up next to the lock nut, took the exhaust off to get to the clutch actuation cover and got that off.... the Inner Ramp did look like it was not sitting at “6 oclock” so I pushed it back into that position. When I simulated pulling the clutch lever the inner ramp lifted so I think the 3 ball bearings are still where they should be. Put everything back, adjusted the clutch cable and exactly the same symptoms... no clutch bite. I’ve given the bike to a tech now as I need to get it fixed and back on the road... will be interested to see what he finds.
Advanced
Joined: Apr 2012
Posts: 92
Likes: 0
From: long island, ny
Well, bike was picked up Sat night and fixed by early Sun afternoon. Mechanic said that "the clutch adjustment screw wasn't engaing the push rod" and so the clutch wasnt engaging... clutch is now working and feels really smooth actually. He also tidied up some wiring and cleaned it... $200... pleased to be back on the road.
Thread
Thread Starter
Forum
Replies
Last Post
up in minot
Dyna Glide Models
14
Apr 14, 2008 08:55 PM
