BCT baffles questions
Ultimate HDF Member
Joined: Dec 2008
Posts: 5,120
Likes: 17
From: Indiana
That's about where the screw is. The directions say to drill the hole 3-6" from the end.
On a side night I just took the bike out today for the first time set up as the monster baffles because I cut the cones off of the QQ's I bought and it definitely has more pep. Also 6th gear is usable at 60mph finally. I don't feel like I have to drop it into 5th just to climb a little hill. The decel popping is different, but I'm going to ride with it for the week and then next weekend I'll chop the stock V&H and install that with the BCT and from what I read gets rid of all the decel popping, so we'll see.
On a side night I just took the bike out today for the first time set up as the monster baffles because I cut the cones off of the QQ's I bought and it definitely has more pep. Also 6th gear is usable at 60mph finally. I don't feel like I have to drop it into 5th just to climb a little hill. The decel popping is different, but I'm going to ride with it for the week and then next weekend I'll chop the stock V&H and install that with the BCT and from what I read gets rid of all the decel popping, so we'll see.
Last edited by JaronB; Aug 11, 2013 at 10:07 AM.
Thread
Thread Starter
Forum
Replies
Last Post
