Heel Toe Shifter
#1
Heel Toe Shifter
Anybody have a heel / toe shifter AND forward controls. Had this on a Honda (with standard levers and floor boards) years ago and really enjoyed it. I guess it can be done - the mechanic at the dealer said Switchbacks come in this configuration, though they didn't have one in stock. A photo as well would be much appreciated.
Thanks:
Jay
Thanks:
Jay
#3
Anybody have a heel / toe shifter AND forward controls. Had this on a Honda (with standard levers and floor boards) years ago and really enjoyed it. I guess it can be done - the mechanic at the dealer said Switchbacks come in this configuration, though they didn't have one in stock. A photo as well would be much appreciated.
Thanks:
Jay
Thanks:
Jay
See the following thread:
https://www.hdforums.com/forum/dyna-...-w-pics-7.html
__________________________________________________ _________
#4
You can take a inner shift rod arm off a Soft Tail pn33668-07 and grind the weld to remove the pin. Then do the same on the inner Switchback arm pn33789-90B and weld the longer spline shaft off the Soft Tail to the Switchback arm. The weld will be to the inside and not really show or you can rechrome if needed.
Last edited by pntmachine; 09-14-2014 at 10:37 PM.
#5
#6
#7
Trending Topics
#9
Join Date: Mar 2007
Location: Chicago suburbs (Elgin/Schaumburg)
Posts: 19,481
Likes: 0
Received 24 Likes
on
22 Posts
i made my own... first thing i did was get a shifter arm as well as a shifter lever from a touring bike, cut he spines off the arm. and weld that to the shifter lever
i am running boards on mine off the foward mounts so i needed the heel to clear the board so i had to add 1" to the lever, some round bar and some grinding helped this issue
all powder coated and installed, i did order a extended peg and put the stock on on the heel and the longer one on the toe
I LOVE THIS, no idea how i lived without it
i am running boards on mine off the foward mounts so i needed the heel to clear the board so i had to add 1" to the lever, some round bar and some grinding helped this issue
all powder coated and installed, i did order a extended peg and put the stock on on the heel and the longer one on the toe
I LOVE THIS, no idea how i lived without it
Thread
Thread Starter
Forum
Replies
Last Post
scottgenghiswong
General Harley Davidson Chat
78
06-23-2010 06:35 AM