Leak help / torque specs
Thread Starter
|
Tourer
Joined: Nov 2010
Posts: 262
Likes: 4
From: NYC
So
Confirmed leak is definitely coming from the cass seam.
Has anyone had any luck with 3m or ultra grey black ? I know I have to clean the area really well and I was going to use a dremel and lightly go over the seam and then do a light bead down the length of case.
Any other suggestions or ideas
Confirmed leak is definitely coming from the cass seam.
Has anyone had any luck with 3m or ultra grey black ? I know I have to clean the area really well and I was going to use a dremel and lightly go over the seam and then do a light bead down the length of case.
Any other suggestions or ideas
Road Master
Joined: Jan 2006
Posts: 1,221
Likes: 40
From: Chester NY
Havent heard of that working too well. worth a shot i guess as the other way is to pull the complete motor down to inspect and correct. I see your cases were powdercoated. Did you assemble yourself? Was they overspray on the seams?
Thread Starter
|
Tourer
Joined: Nov 2010
Posts: 262
Likes: 4
From: NYC
A local shop did the motor work but they are no longer around. No over spray visible on the seams.
I'll give it a shot and see what happens. Either loctite 518 or 3m grey is what I'm considering trying.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
