Crane Fireball Dual-fire coil installation help required...

Reply Subscribe

Thread Tools

Search this Thread

Mar 1, 2015 | 01:13 PM

stephtell

Thread Starter

Tourer

Joined: Feb 2015

Posts: 296

Likes: 40

From: Holland

Crane Fireball Dual-fire coil installation help required...

Good evening all,

I was tidying up some wiring undernath the tank and spotted two new plugwires on, what seems to be, an old original coil.

I happen to have an almost new Crane Fireball Dual-fire off siting idle so I thouhgt I'd fit that.

However: there are THREE wires connected to my OEM coil and there are only TWO connections on the Crane item...

As I can't seem to find an installation guide for the Crane online I thought I'd ask you lot...maybe there's someone that knows what to do?

Cheers!

Mar 1, 2015 | 01:20 PM

stephtell

Thread Starter

Tourer

Joined: Feb 2015

Posts: 296

Likes: 40

From: Holland

Oh, by the way it's a PN 8-3006 coil and the bike has a Dyna 2000 ignition module on it!

Mar 1, 2015 | 01:21 PM

Beemervet

Ultimate HDF Member

Joined: May 2006

Posts: 6,590

Likes: 444

From: Ohio

http://www.cranecams.com/instruction...atagory_sub=23

Three wire coils are for single fire ignitions.
Hope the link helps.

Mar 1, 2015 | 01:23 PM

Beemervet

Ultimate HDF Member

Joined: May 2006

Posts: 6,590

Likes: 444

From: Ohio

Quote:

Originally Posted by stephtell

Oh, by the way it's a PN 8-3006 coil and the bike has a Dyna 2000 ignition module on it!

In that case I'd leave the Dyna in it.

Mar 1, 2015 | 01:25 PM

stephtell

Thread Starter

Tourer

Joined: Feb 2015

Posts: 296

Likes: 40

From: Holland

Thanks for that!

Although...surely the OEM item isn't single fire...? It looks like a stock coil, or atleast, it doesn't bear any marking of any performance item?

Mar 1, 2015 | 01:26 PM

stephtell

Thread Starter

Tourer

Joined: Feb 2015

Posts: 296

Likes: 40

From: Holland

Mix up:

I've no intention of removing the Dyna module!

I just thought I'd switch the stock coil for the Crane item!

Mar 1, 2015 | 01:36 PM

Beemervet

Ultimate HDF Member

Joined: May 2006

Posts: 6,590

Likes: 444

From: Ohio

No idea what brand coil you have installed now, but it is the correct one for the single fire Dyna ignition. The Crane coil is for use with the stock electronic ignition, and is dual fire. Leave it on the shelf, or sell it.