start stop issue.
Thread Starter
|
Stage I
Joined: Mar 2018
Posts: 1
Likes: 0
From: St. Louis, Mo
start stop issue.
Built bike. 1984 fdwg wiring I think. Bike was starting. I changed the ignition switch and rewired some wires from the handle bars. Now, it will crank with ignition off. When I put the ignition on it won't crank. When I put the kill switch off and the ignition on it will crank. I have the gray wire going to the kill switch so I don't know how it is getting power to the start button with it in the kill position.
Dirt don't hurt
Joined: Jan 2011
Posts: 21,062
Likes: 4,547
From: Haslet Texas
Built bike. 1984 fdwg wiring I think. Bike was starting. I changed the ignition switch and rewired some wires from the handle bars. Now, it will crank with ignition off. When I put the ignition on it won't crank. When I put the kill switch off and the ignition on it will crank. I have the gray wire going to the kill switch so I don't know how it is getting power to the start button with it in the kill position.
Put the wires back to the way they were when it worked.
Thread
Thread Starter
Forum
Replies
Last Post
BaggerBill103
Electrical/Lighting/Alarm
0
Aug 19, 2018 07:23 AM
crawfordcl
Ignition/Tuner/ECM/Fuel Injection
12
Sep 15, 2010 10:52 AM
