When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have an 88 electra guide classic. The issue I have is rolling into the throttle it almost acts like it is going to stall out. Unless I let off the throttle then try to roll into it. It is idling at about 900 rpm once it warms up. I recently cleaned and replaced all gaskets. The jets have been replaced as well. Didn't notice issue prior to rebuild. Have done some looking at videos but have not found a solution yet and want to get some riding done. Any and all assistance is greatly appreciated
I have an 88 electra guide classic. The issue I have is rolling into the throttle it almost acts like it is going to stall out. Unless I let off the throttle then try to roll into it. It is idling at about 900 rpm once it warms up. I recently cleaned and replaced all gaskets. The jets have been replaced as well. Didn't notice issue prior to rebuild. Have done some looking at videos but have not found a solution yet and want to get some riding done. Any and all assistance is greatly appreciated
Sounds like you need to go back and see what you did wrong on the rebuild.
What carb do you have?