97 ultra classic
Seasoned HDF Member
Joined: Feb 2007
Posts: 6,086
Likes: 1,128
From:
What does entire brake light assembly mean to you?
What does bottom running light mean to you?
We can not see the bike and have no clue if the motorcycle is a custom, factory original or if this was a rebuilt motorcycle.
A picture alone may not be enough.
Keep in mind that some individuals have changed their single filament factory flat lens rear turn signals to dual filament 1157.
Some have installed a run/turn/brake module in order to control rear lighting.
If something was changed to aftermarket then an exact product name and item number might also help when sharing information.
Others have changed the factory tail light too.
Wish you luck in your search for a solution..
Check front brake switch and review switch clamp at bar for wire damage.
The wire bundle under rear fender can get damaged too if someone lowered the rear of bike since that can allow rear tire to scrub against wires.
Perhaps a parts finder will help you when trying to identify parts for others.
http://partsfinder.onlinemicrofiche.....asp?make=hdmc
Thread Starter
|
3rd Gear
Joined: Apr 2022
Posts: 7
Likes: 0
From: Indiana
I believe the light assembly ( mount, lens,and internals-all solid state) are for an 03. And everything worked perfectly when first installed. Bike is stock ride hight. Visual inspection shows no damage to the harness under the fender. I disconnected rear harness and it has no effect on the other lighting problem. Why are the lights going off with the Accy locked fuse in place? What is the purpose of that circuit? I'm going to pull the fairing this afternoon, and will be checking the brake light switch.
Stage IV
Joined: Jun 2022
Posts: 4
Likes: 0
From: CA
New rider NEEDS help!!!!
I have a 97 ultra classic and when I try to pull away from a stop the bike boggs down and sputters loosing all power. If I let off the throttle it ease's some what, but still lagged. This happens all the way through third gear. Please help!!!!
Stage IV
Joined: Jun 2022
Posts: 4
Likes: 0
From: CA
New rider NEEDS help!!!!
I have a 97 ultra classic and when I try to pull away from a stop the bike boggs down and sputters loosing all power. If I let off the throttle it ease's some what, but still lagged. This happens all the way through third gear. Please help!!!!
Seasoned HDF Member
Joined: Feb 2007
Posts: 6,086
Likes: 1,128
From:
As a suggestion, review inside of tank for trash like tank liner blocking fuel inlet.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Thread Starter
|
3rd Gear
Joined: Apr 2022
Posts: 7
Likes: 0
From: Indiana
Been a while since I posted this thread, found the problem after a lengthy search to be a corroded pin in one of the harness plugs. Had nothing at all to do with the changes I made to the lights.
Thread
Thread Starter
Forum
Replies
Last Post
cutacroshorty
Touring Models
14
Apr 21, 2007 12:22 AM