peeling chrome, problem?
Thread Starter
|
Road Captain
Joined: Dec 2010
Posts: 621
Likes: 19
From: Glendora, Southern Calif
peeling chrome, problem?
Chipped off a part of chrome on my thundercone, thunderheader slip on, on my low rider.
It was very close to the connector bit of the pipe to the header.
Chrome peeled right off.
Is this going to be a future problem if I leave it as is? I'm concerned about the rust and possible degradation to the other bits of the pipe
Visually it's hidden under the exhaust clamp, and I've also applied anti seize when installing.
It was very close to the connector bit of the pipe to the header.
Chrome peeled right off.
Is this going to be a future problem if I leave it as is? I'm concerned about the rust and possible degradation to the other bits of the pipe
Visually it's hidden under the exhaust clamp, and I've also applied anti seize when installing.
Thread
Thread Starter
Forum
Replies
Last Post
Ozark Joe
General Harley Davidson Chat
16
May 2, 2017 06:33 PM
