When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm sharing this story in the hope it can prevent it from happening to you.
Yesterday, in preparation for winter storage, I washed my 2012 Street Glide. After washing it, I started the engine to drive it into my garage. My driveway has a bit of a slope to it. I turned my back on the bike while it was idling to go into the garage to move the hose out of the way. I heard something scraping on the driveway and turned to see my beautiful bike rolling down my driveway backwards, dragging the kickstand. I ran for it but couldn't get to her in time. Her bars turned and she went *** end into the rear fender of my wife's car!!!! Of course, after hitting the car, she fell over onto her side.
I should add the my ashpalt driveway was recently sealed and has been quite slippery. This, combined with the water on the driveway, substantial winds (was a windy day) and the vibration of the engine idling caused the stand to lose grip and away she went.
So, don't idle your bike on a sloped ashphat driveway unless you're sitting on it!!
Last edited by bluenoser17; Nov 29, 2013 at 07:25 AM.
So sorry to hear, does kinda suck going into winter...All my wrenchhead friends tell that excessive idling is bad...(unless it's sub-freezing) idle for 45 seconds take off easily. Same thing on return idle for 45 seconds then shut down (without blipping the throttle every 2 seconds).
For 45 seconds I can sit on the bike eliminating this worry.
The other thing they say is unless you're gonna bring the bike to operating temperature keep the idliding/running to an absolute minimum.
Did it really matter that it was a Street Glide, or even what year it was?
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.