Wheel Dolly
Thread Starter
|
Cruiser
Joined: Nov 2006
Posts: 200
Likes: 1
From: Southern New Hampshire-USA
Wheel Dolly
2005 FLHTCI here... wondering what folks are using for a Wheel Cleaning Stand for their bike? Basically, I want to roll my wheel/s on dolly so I can rotate it to clean.
I believe the bike weight is roughly 776-820#'s. Not sure what it would be at each wheel. I used a neighbor's stand and it was a Grand Pit Stop brand which held less than 485#, so That is out of the question.
What is out there; what are u folks using that will hold the weight and turn with "ease"?
thnx.
I believe the bike weight is roughly 776-820#'s. Not sure what it would be at each wheel. I used a neighbor's stand and it was a Grand Pit Stop brand which held less than 485#, so That is out of the question.
What is out there; what are u folks using that will hold the weight and turn with "ease"?
thnx.
Seasoned HDF Member
Joined: Apr 2010
Posts: 9,576
Likes: 7,953
From: Long Island, New York
I have one of those roller stands from J&P, does not work as planned. Because you have your bike on the jiffy stand, the wheel is not straight and it walks off to one side of the rollers. I used it a couple of times then decided it was more of a PITA then just rolling the bike forward.
Seasoned HDF Member
Joined: Jun 2017
Posts: 5,315
Likes: 4,272
From: Granville New York
If the bikes already up on the jack I'll clean the wheels while it's up but I go typically use the roll forward or backwards depending upon my mood that day. The back wheel can be tough to get in one move but it's possible if I bend my fat *** over enough. I think those rollers are intended for bikes that have a center stand...maybe.
Thread Starter
|
Cruiser
Joined: Nov 2006
Posts: 200
Likes: 1
From: Southern New Hampshire-USA
Sorry ppl, forgot to mention
my bike has a sidecar, so bike is straight.
I do roll the bike forward/back when working on wheels but the dolly seems much more easier. Like I said, I used neighbors but it just didnt hold the weight on rear wheel. Too hard to spin.
I guess I can use a bike jack just enough to lift wheel/s off ground. The Dolly just seemed simple and smarter to use.
thnx for all the replies!
I do roll the bike forward/back when working on wheels but the dolly seems much more easier. Like I said, I used neighbors but it just didnt hold the weight on rear wheel. Too hard to spin.
I guess I can use a bike jack just enough to lift wheel/s off ground. The Dolly just seemed simple and smarter to use.
thnx for all the replies!
Trending Topics
HDF Community Team
Joined: Dec 2011
Posts: 8,601
Likes: 4,037
From: San Diego, CA
I have one of those roller stands from J&P, does not work as planned. Because you have your bike on the jiffy stand, the wheel is not straight and it walks off to one side of the rollers. I used it a couple of times then decided it was more of a PITA then just rolling the bike forward.
John
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
Thread
Thread Starter
Forum
Replies
Last Post
