2013 Switchback

Reply Subscribe

Thread Tools

Search this Thread

Nov 3, 2013 | 05:57 AM

Tahaa

Thread Starter

2nd Gear

Joined: Nov 2012

Posts: 6

Likes: 0

From: Huntington Beach

2013 Switchback

My 2013 Switchback seems to rev power or surge up and down on it's own when started, any idea's why? I shut it off and restart and it seems to work, but it's kind of scary when it does this.

Nov 3, 2013 | 06:02 AM

checkers

Ultimate HDF Member

Joined: Jan 2009

Posts: 5,016

Likes: 277

From: East Tn Foot of The Dragon

Quote:

Originally Posted by Tahaa

My 2013 Switchback seems to rev power or surge up and down on it's own when started, any idea's why? I shut it off and restart and it seems to work, but it's kind of scary when it does this.

I don't know how much "rev" you are getting, but some is normal. It may help if when you turn on ignition, wait a few seconds before cranking engine. This allows the ECM to monitor sensors before engine is started. It is a habit you can get in to. Also when it revs after a start, let idle settle before engaging into gear.

Nov 3, 2013 | 06:06 AM

Tahaa

Thread Starter

2nd Gear

Joined: Nov 2012

Posts: 6

Likes: 0

From: Huntington Beach

Thanks so much.. It's almost like I'm reving the throttle like a gremlin in is there messing with me, you are right I think I try to start it too soon after I switch it on..

Last edited by Tahaa; Nov 3, 2013 at 06:08 AM. Reason: mis spelled

Nov 3, 2013 | 06:40 AM

Iceman24

Seasoned HDF Member

Joined: Sep 2009

Posts: 25,306

Likes: 2,443

From: Eastern NE

Also, when you shut-down the bike...let it idle @ normal RPM a bit before hitting the stop switch. The ECM is sensitive and can fluctuate your idle settings a bit if you're not starting & stopping the bike properly.