TSSM- Code
TSSM- Code
Big Kahuna HDF Member
Joined: Feb 2006
Posts: 23,881
Likes: 34
From: USA
Not worthless, you can do the reset or relearn password procedure.
Reset:
step # 1. move handle bar kill switch to off position
step # 2. turn your ignition key: on-off, on-off then on
step # 3. hit the left turn signal twice.
your turn signals and indicator light will flash 1 - 3 flashes
step # 4. hit the right turn signal once.
turn signals and indicator light will flash once.
step # 5. hit the right turn signal once.
turn and indicator signals will flash twice.
step # 6. hit right turn signal once.
turn and indicator signals will flash three times.
step # 7. hit left turn signal once.
turn and indicator signals flash to indicate error code
(see error code thread)
step # 8. to now clear codes, hit left turn signal and hold down for 6 seconds until confirmation.
turn and indicator signals flash twice.
step # 9. turn the ign switch to off
Reset:
step # 1. move handle bar kill switch to off position
step # 2. turn your ignition key: on-off, on-off then on
step # 3. hit the left turn signal twice.
your turn signals and indicator light will flash 1 - 3 flashes
step # 4. hit the right turn signal once.
turn signals and indicator light will flash once.
step # 5. hit the right turn signal once.
turn and indicator signals will flash twice.
step # 6. hit right turn signal once.
turn and indicator signals will flash three times.
step # 7. hit left turn signal once.
turn and indicator signals flash to indicate error code
(see error code thread)
step # 8. to now clear codes, hit left turn signal and hold down for 6 seconds until confirmation.
turn and indicator signals flash twice.
step # 9. turn the ign switch to off
Big Kahuna HDF Member
Joined: Feb 2006
Posts: 23,881
Likes: 34
From: USA
Cruiser
Joined: Jun 2008
Posts: 153
Likes: 2
From: Middleburg, Fl
I have a used TSSM that I installed on my 2008 Roadking. I have tried the new learn procedure to no avail. I took my bike to my local dealer and they tried to install and told me that once they hook up unit it immediatly goes into an "Armed State".
While it is in this "Armed State" nothing can be done to bike.(All of this is what I had already deducted). Aparently the person that had the TSSM on their bike changed the code and now the TSSM is not reprogramable.
Has anyone heard of this and or know of a solution short of buying a new TSSM?
While it is in this "Armed State" nothing can be done to bike.(All of this is what I had already deducted). Aparently the person that had the TSSM on their bike changed the code and now the TSSM is not reprogramable.
Has anyone heard of this and or know of a solution short of buying a new TSSM?
Thread Starter
|
Cruiser
Joined: Oct 2007
Posts: 168
Likes: 0
From: Grand Junction, Co
Beware of buying or selling TSSM units unless you know the 5 digit security code. The unit won`t work !!!!! It goes into an alarm state and the dealer or you can`t retrieve the code.......rendering it USELESS.
Thread
Thread Starter
Forum
Replies
Last Post
Reindeer
Ignition/Tuner/ECM/Fuel Injection
11
Sep 27, 2012 06:34 AM
