The wire reroute didn't work so the dealer put a new ECM in the other bike. Still coded. So MoCo says check the plug wires. Bingo. Did my own investigation. Front left wire rubbing against the tank. New wire set and runs great without coding.
Sorry for the late response. The dealer ended up changing spark plug wires and installing new spark plugs. That fixed it! Not sure why and how but im willing to bet that the front wire was rubbing the tank like the earlier post suggested. Thanks for the help guys.
Thanks guys for this thread! Bike was stalling and cel came on. ECM codes came up P2300 and P2305(?)
Read this thread and started with changing, actually upgrading to SE plug wires and it solved the problem!!! Thank
you for the expertise and sharing what helped fixed your same issue!!!
Hello, does anyone have any input about a P2300 engine code? P2300 - Ignition coil driver low/open (front). I had an issue that sounds similar to sumping but i have an P2300 code. The dealership has already changed the ecm and tried a new ignition coil. I have done some reading about sumping but i dont see any engine codes associated with it. The bike is a 2017 Street Glide CVO with a Stage IV Kit. I bought the bike used with 11k miles that now has 15k miles on it. Thanks in advance.
sorry my speaking not vers good...but i have this code after installing 2 news breather and ...in front cylinder the breather was not correctly install...i re-install in correct position and erase code .Now my bike is ok for à long trip!
04-27-2019, 07:54 PM
Nailed it!
