I should have done more research when I had the cam cover off, but I have due to a failing hydraulic lifter I'm converting to solid lifters. I would like to know what cam I have in there as I can tell it's not the stock cam, or at least I don't think it is. All I have is this picture, it's stamped 63385 and I can't find any info at all online. I'm trying to avoid pulling the cover off again if possible.

I was hoping some of you fine folks might have an idea.

 

the can number is on the back of the cam lobe or the against the gear and some even on the end flank of the cam its self

that number is the gear

 

Post up pic of the cam lobes not all are compatible with solids.