Crankpin torque
Thread Starter
|
HDF Community Team
Joined: Dec 2005
Posts: 5,394
Likes: 2,596
From: NC USA
Thanks George! I figured Evo torque rates would work, but inquiring minds want to know.....
Got the sprocket side to .0005 and the pinion side to .0007 with a .001 dial indicator. Took me a while, but I was tickled with that, especially for a set of wheels that looked like they'd already been hammered on by Thor
George, if you'd seen what I used for a truing stand, you'd hurt yourself laughing...
Got the sprocket side to .0005 and the pinion side to .0007 with a .001 dial indicator. Took me a while, but I was tickled with that, especially for a set of wheels that looked like they'd already been hammered on by Thor
George, if you'd seen what I used for a truing stand, you'd hurt yourself laughing...
Last edited by t150vej; Nov 21, 2009 at 05:18 PM.
Road Warrior
Joined: Dec 2007
Posts: 1,854
Likes: 20
From: Eagle River WI
If you would see the tools I made over the years ( too cheap to pay the big bucks ) we would both be laughing ! I especially like the tool I made for removing the new sealed wheel bearings If I was camera literate I'd send you some pics Question for you Do you know any company that sells fork tube covers 6 in O.S. for a total length of say 12 + in ches ?
Thread
Thread Starter
Forum
Replies
Last Post
