FP3 Map to Use
Thread Starter
|
Advanced
Joined: Feb 2011
Posts: 75
Likes: 26
From: Wolcott, CT
FP3 Map to Use
Talked to V&H about what map to use on FP3 for Stage1 Air Cleaner and American Customs Bullet Slipons on my 16 Fatboy and here was their reply:
American Custom Bullet Slipon with Deep Rumble: Twin Slash map with Standard Baffle
American Custom Bullet Slipon with Mid Rumble: Twin Slash map with Quiet Baffle
After 2 tanks of gas auto-tune above maps if necessary.
Does this sound right? Thanks in advance.
American Custom Bullet Slipon with Deep Rumble: Twin Slash map with Standard Baffle
American Custom Bullet Slipon with Mid Rumble: Twin Slash map with Quiet Baffle
After 2 tanks of gas auto-tune above maps if necessary.
Does this sound right? Thanks in advance.
Thread Starter
|
Advanced
Joined: Feb 2011
Posts: 75
Likes: 26
From: Wolcott, CT
Hopefully auto-tune works. American Custom Mufflers suggested a map that allows for a really free flowing muffler when set up for the "Deep Rumble" baffle and a stage 1 air cleaner.
I have 2018 Fatbob 114 and replaced the exhaust with a TBR 2 into 1 exhaust. I bought the FP3 for it but for now they only have the Vance and Hines Shortshot maps for it. So i used that map and performed an autotune with the FP3 for about 1.5 tank of gas. Then I sent my map to tech support for them to evaluate the autotune. They tweaked my tune and sent me the map that was cleaned up. I’ll let you know if it works for me. AS far as I can tell, they are telling me that autotune gets it super close to what you need.
Thread
Thread Starter
Forum
Replies
Last Post
TexasMotorcycleRider
Milwaukee Eight (M8)
15
Jan 30, 2019 09:02 AM
Other Devices: downloaded map missing from my VH FP3
JZFloatingkent
The Dyno Room
1
May 16, 2017 12:50 AM
