When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So been a couple years since I've been on here but after doing some research I need some help. I have picked up a 2017 Softail Slim (FLSS) in April since then put a couple miles on it but was thinking about different handlebar options.
Question 1. How would a 4" straight risers with drag bars look on the softail slim and feel for comfort?
Question 2. Would I have to replace the stock lines if I put the 4" risers on?
Question 3. Also thought about 6" straight risers probably have to change the stock lines for that.
I would say the risers an drag bars would depend on your arm length...For me I think it'd be too far a reach to be comfortable...I'm looking at bars for my '15 slim an from what I've read an been told I can run up to 10" tall bars with the stock wires an brake line, not sure about a a hydro clutch line or the internal throttle wire though.
2013 softail slim. I put a set of risers off a deluxe, 4 inch curved. They fit great with the stock bars, but no more would fit. The wires and brake lines were at their full tilt and would go no more.
Using 4.5" pull backs with stock cables
switching to streetslammers this winter they're 10" and almost 4" narrower and should fit. Bought them from a member here who had them on their Slim
Ok thanks for the input guys. When I talked with a guy at the Harley shop he said I should be fine with the 4" straight risers not sure about 6" straight risers. Not looking to have any pullback.
The last sat time I changed out handlebars was on my 2012 Fatboy Lo and that was a pain. Not sure how this will go with the electric throttle and all.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.