Need help, handlebar change.
Thread Starter
|
Cruiser
Joined: Jun 2006
Posts: 142
Likes: 0
From:
Need help, handlebar change.
I have an 06 Deluxe and I am in the middle of changing my stock bars to the HD narrow beach bars. I am running my wires inside my bars but I am having trouble removing my pins from the electrical connector. I need to know what you guys use to release the pins from the connector. I have pulled the rubber boot from the connector to expose the pins but I cant squeeze a scribe in the slot. please help!
Tom here. See this thread. A pick tool works great, or a jewelers screw driver. https://www.hdforums.com/forum/dyna-...e-install.html
Regards,
Tom
Harley Goodies
Regards,
Tom
Harley Goodies
Extreme HDF Member
Joined: Mar 2008
Posts: 14,865
Likes: 4
From: Mn.on a lake,well nxt to a lake.
I had no problems doing my 06,took about 15-20 sec and pins were out,I used a small screwdrive to release each pin and pulled on the wire,they all poped out one by one..
Grand HDF Member
Joined: May 2008
Posts: 4,624
Likes: 189
From: Newcastle, Ca.
Trending Topics
Tourer
Joined: Feb 2009
Posts: 385
Likes: 1
From: Ontario, Canada
I used stainless steel dental tools. They were great. Picked them up at an auto surplus place.... 4 for $8. I'll go see if I can find a link.
https://www.hdforums.com/forum/softa...ecth-help.html
____________
https://www.hdforums.com/forum/softa...ecth-help.html
____________
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
The Best and Worst Harley-Davidson Moves of 2025
Verdad Gallardo
Outstanding HDF Member
Joined: Nov 2008
Posts: 2,864
Likes: 7
From: kansas city,mo
Yea, i messed with those damm connectors and i got out about half of them. Then got pissed and then i just cut the damm thing out and spliced my wires back together(solder). Everything works perfect. And my connector looked different also. It took me more time messing with the connectors than it did to take the tank off. Go figure....
Thread Starter
|
Cruiser
Joined: Jun 2006
Posts: 142
Likes: 0
From:
Thanks for the replys and links. I found the link showing how to remove the pins from the connector and it was money. I broke my fuel line from the fuel tank to the fuel injection and I was upset. thanks again.