Installed the Power Vision tuner
Thread Starter
|
Cruiser
Joined: Mar 2010
Posts: 147
Likes: 0
Installed the Power Vision tuner
I could'nt wait for the weekend so I installed it today. The process was super easy, it's all touch screen and very intuitive. Plugged it in and the unit immediately comunicated with the ECM.
I then saved the stock configuration in the unit and loaded the custom map that Fuel Moto included for my setup. The units now holds both maps (no need for a laptop although the unit comes with software that can be intalled on a laptop for richer functionality).
I then diconnected the unit and I was done.the whole process took 2 minutes. The unit can stay on the bike if I want to monitor all kinds of items.
The map that Fuel Moto sent was dead on. It feels like a different bike. It runs so much better with noticable increase in both torque and power.
I will probably experiment with the tuning options later but so far I' m very impressed with this unit.
I then saved the stock configuration in the unit and loaded the custom map that Fuel Moto included for my setup. The units now holds both maps (no need for a laptop although the unit comes with software that can be intalled on a laptop for richer functionality).
I then diconnected the unit and I was done.the whole process took 2 minutes. The unit can stay on the bike if I want to monitor all kinds of items.
The map that Fuel Moto sent was dead on. It feels like a different bike. It runs so much better with noticable increase in both torque and power.
I will probably experiment with the tuning options later but so far I' m very impressed with this unit.
Thread Starter
|
Cruiser
Joined: Mar 2010
Posts: 147
Likes: 0
I did not have one. I just had a Samson exhaust and stock air filter. The bike did not run very well (loss of torque and rough). I just installed a high flow air filter and the Power Vision tuner and it's night and day.
Would I get the same results with another tuner? probably but I really like how easy this one is to use. You can leave it on the bike and take it off. If you leave it on you can monitor the engine on the screen and even acess tuning features.
Would I get the same results with another tuner? probably but I really like how easy this one is to use. You can leave it on the bike and take it off. If you leave it on you can monitor the engine on the screen and even acess tuning features.
Cruiser
Joined: Oct 2010
Posts: 104
Likes: 0
From: Hartford,CT
im gonna use my dummy card for the day lol. unlike a pc3 or 5 or fuelpak, the unit doesnt have to stay on the bike? it just reflases the factory ecm?
Trending Topics
Thread Starter
|
Cruiser
Joined: Mar 2010
Posts: 147
Likes: 0
Yes, but you can save the facory map on the unit.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
