Feb 13, 2015, 01:41 PM

How-Tos on this Topic

Everything Breakout! Find out everything you need to know! Some topics include:

• Customizing you bike
• Seats
• Risers
• And much more!

For more information check out these threads:More Threads

The Everything Breakout Thread

Reply Subscribe

Thread Tools

Search this Thread

Jul 10, 2016 | 07:37 PM

#4941

Duke 13

Cruiser

Joined: Apr 2016

Posts: 124

Likes: 7

From: Louisville, KY

[QUOTE=tphykitt;15307100]Ill have to look those up! Thank you

Quote:

Originally Posted by HKMark23

Have you considered a tank lift ? Its cheap and relatively easy to do. The mod would include apes, I assume, and there are various ways you can get the speedo to clear the tank, allowing for the lift.

Hmmm, i have not. Is the tank lift displayed in your picture? I don't want really high apes. Just a little more pull back.

I was corrected on the diameter of the fork tubes on the Breakout. They are actually 49 mm but there are some listed on eBay to fit it.

Last edited by Duke 13; Jul 11, 2016 at 11:28 PM. Reason: Wrong info

Jul 10, 2016 | 10:46 PM

#4942

HenryT

Road Master

Joined: Sep 2015

Posts: 795

Likes: 75

From: Kane County IL

[QUOTE=Duke 13;15314153]

Quote:

Originally Posted by tphykitt

Ill have to look those up! Thank you

I was corrected on the diameter of the fork tubes on the Breakout. They are actually 41 mm but there are some listed on eBay to fit it.

Nahh they are 49mm. This is so silly...who "corrected" you?

Last edited by HenryT; Jul 10, 2016 at 10:48 PM.

Jul 11, 2016 | 12:13 AM

#4943

HKMark23

Seasoned HDF Member

Joined: Sep 2013

Posts: 6,174

Likes: 1,960

From: Great State of Canada

[QUOTE=HenryT;15314701]

Quote:

Originally Posted by Duke 13

Nahh they are 49mm. This is so silly...who "corrected" you?

Recently completed a Ricor suspension upgrade on my ride. The 2014 FXSB is certainly 49 mm. That I can confirm.

Jul 11, 2016 | 11:29 PM

#4944

Duke 13

Cruiser

Joined: Apr 2016

Posts: 124

Likes: 7

From: Louisville, KY

[QUOTE=HenryT;15314701]

Quote:

Originally Posted by Duke 13

Nahh they are 49mm. This is so silly...who "corrected" you?

I would say but not going to make any enemies. I changed my post per your reply.
Thanks Henry!

Jul 12, 2016 | 07:31 PM

#4945

ChromeSpark

Advanced

Joined: Jun 2016

Posts: 93

Likes: 6

From: Euless

Quote:

Originally Posted by asputin

Anyone having trouble with hot starts? the last couple weekends on 200+ mile rides,after a stop for fuel or whatever,mine wont turn over.almost like the battery is low.ill let off starter,give it a second,hit it again and it fires up...

If you are having this problem still, have the auto compression setting checked. Found mine was disabled (off) had the same symptoms. Service at dealer didn't even know it had it

Jul 13, 2016 | 01:58 AM

#4946

Nostradamus74

Road Captain

Joined: Dec 2013

Posts: 631

Likes: 26

From: Rome (Italy)

Some SE maps downloaded via SEPST have ACR disabled and dealers often don't pay attention to this setting. Probably these maps are used both for 96" and 103" engines and since 96" doesn't have ACR that's the reason why it's disabled. On 103" ACR enabled is even more important if you have a stage I,II etc. since it helps starting the bike up. What ChromeSpark correctly said might be the problem or at least part of it.