Feb 13, 2015, 01:41 PM
Last edit by: IB Advertising
Everything Breakout! Find out everything you need to know! Some topics include:
• Customizing you bike
• Seats
• Risers
• And much more!
For more information check out these threads:More Threads
• Customizing you bike
• Seats
• Risers
• And much more!
For more information check out these threads:More Threads
The Everything Breakout Thread
Seasoned HDF Member
Joined: Sep 2013
Posts: 6,174
Likes: 1,960
From: Great State of Canada
Whats to hate ? HD ownership is supposed to be about not marching in lock-step 
and your mods are continuing proof of the versatility of the FXSB in particular. "Nice job on em". 
and your mods are continuing proof of the versatility of the FXSB in particular. "Nice job on em".
Tourer
Joined: Aug 2014
Posts: 405
Likes: 88
From: South Louisiana
I said "here comes the hate" because I've seen numerous people on numerous occasions scold Breakout owners for putting bags on a FXSB. I agree, the bike looks so much better naked. While I would never put bags as a permanent item, the occasional trip would suffice. Buying a bagger just for long trips is pretty ridiculous when the Breakout can tour with a few mods, no problem.
Basically, I was implying to the people who were ready to state the already obvious. Breakouts are fugly with bags, let alone added trunk.
Basically, I was implying to the people who were ready to state the already obvious. Breakouts are fugly with bags, let alone added trunk.
Cruiser
Joined: Nov 2013
Posts: 145
Likes: 2
From: Kobe, Japan
Black line tank console
Anyone knows where my friend in US can order all parts for the tank console ?
60900001 top plate
71340-11 is the dash panel
72775-11 is the little Harley logo trim insert
Two of 71576-08A is the rubber strips that go between the dash and the gas tank
Thanks
60900001 top plate
71340-11 is the dash panel
72775-11 is the little Harley logo trim insert
Two of 71576-08A is the rubber strips that go between the dash and the gas tank
Thanks
Advanced
Joined: Jul 2016
Posts: 98
Likes: 9
From: Aurora CO
www.surdyke.com
Ultimate HDF Member
Joined: Nov 2013
Posts: 7,492
Likes: 103
From: Stuttgart, Germany
Road Warrior
Joined: Mar 2014
Posts: 1,973
Likes: 158
From: East Coast
What do you have to buy 2 bikes, or modify it for the occassion.
Breakout is Bad *** looking machine in its normal configuration.
Your traveling and it sure looks safer than some of the other bikes out on a trip with stuff hanging off and/or piled very high.
Looks like you have a safe traveling setup.
Breakout is Bad *** looking machine in its normal configuration.
Your traveling and it sure looks safer than some of the other bikes out on a trip with stuff hanging off and/or piled very high.
Looks like you have a safe traveling setup.
Seasoned HDF Member
Joined: Sep 2013
Posts: 6,174
Likes: 1,960
From: Great State of Canada
There's looking and there's being. I've been working at sea for 25 + years and can guarantee when I lash gear to a sissy-bar, its staying on the sissy-bar. Others have acquired those skills in different ways, I'm sure. For the rest of you, they make cable ties and duct tape. 
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Stage II
Joined: Oct 2016
Posts: 2
Likes: 0
From: Arizona
LADog
I was wanting to know how you installed the rizoma custom mirrors. I got a set for my 2016 breakout and the screw it came with is too thick and too short to fit on my bike. Appreciate any help or suggestions.
> VH Big Radius 2-2 pipes with BCT baffles
> PM wheels
> Pirelli night dragon tires
> EBC HH front brake pads
> Arlen Ness 70t rear pulley and triglide 30t front pulley (sticky at top of softail forum)
> Gunmetal Gray metallic paint from House of Kolor
> ol school HD tank badges
> custom seat by local upholstery shop, alcantara suede with plain Italian leather
> Andrews 57h cams
> stock 46mm throttle body bored to 50mm, 4.9 screaming eagle injectors (any softail / dyna 46mm throttle body from 2007-up will work). had the boring service done by George at www.maxbore.com for $125
> Powervision tuner with Target Tune wide band add on
> Racetech 1.0kg fork springs with Ricor Intiminator dampers, 5w fork oil. (sticky at top of softail forum)
> Progressive 422 rear shocks lowered 1.25" (but I don't really like them)
> micro stealth front led turn signal bulbs from amazon / JDM ASTAR - there is a thread on this in the softail section here "$22 diy turn signals"
> 3M carbon fiber vinyl wrap on tank dash and fork upper tubes
> black powdercoated rear fender struts, black painted rear turn signal housings, lots of various bolt heads painted black
> black headlight housing trim ring (ebay)
> spike front axle cap nut covers (ebay)
> knurled design gunmetal HD grips and front pegs
> Rizoma Circuit 851 mirrors (got the idea from some custom BO's on thunderbike.de website)
Jeremy
I was wanting to know how you installed the rizoma custom mirrors. I got a set for my 2016 breakout and the screw it came with is too thick and too short to fit on my bike. Appreciate any help or suggestions.
> VH Big Radius 2-2 pipes with BCT baffles
> PM wheels
> Pirelli night dragon tires
> EBC HH front brake pads
> Arlen Ness 70t rear pulley and triglide 30t front pulley (sticky at top of softail forum)
> Gunmetal Gray metallic paint from House of Kolor
> ol school HD tank badges
> custom seat by local upholstery shop, alcantara suede with plain Italian leather
> Andrews 57h cams
> stock 46mm throttle body bored to 50mm, 4.9 screaming eagle injectors (any softail / dyna 46mm throttle body from 2007-up will work). had the boring service done by George at www.maxbore.com for $125
> Powervision tuner with Target Tune wide band add on
> Racetech 1.0kg fork springs with Ricor Intiminator dampers, 5w fork oil. (sticky at top of softail forum)
> Progressive 422 rear shocks lowered 1.25" (but I don't really like them)
> micro stealth front led turn signal bulbs from amazon / JDM ASTAR - there is a thread on this in the softail section here "$22 diy turn signals"
> 3M carbon fiber vinyl wrap on tank dash and fork upper tubes
> black powdercoated rear fender struts, black painted rear turn signal housings, lots of various bolt heads painted black
> black headlight housing trim ring (ebay)
> spike front axle cap nut covers (ebay)
> knurled design gunmetal HD grips and front pegs
> Rizoma Circuit 851 mirrors (got the idea from some custom BO's on thunderbike.de website)
Jeremy
Last edited by jeremywu74; Oct 9, 2016 at 07:47 PM. Reason: didnt get all the info in the first time
Ultimate HDF Member
Joined: Nov 2013
Posts: 7,492
Likes: 103
From: Stuttgart, Germany
LADog
I was wanting to know how you installed the rizoma custom mirrors. I got a set for my 2016 breakout and the screw it came with is too thick and too short to fit on my bike. Appreciate any help or suggestions.
> VH Big Radius 2-2 pipes with BCT baffles
> PM wheels
> Pirelli night dragon tires
> EBC HH front brake pads
> Arlen Ness 70t rear pulley and triglide 30t front pulley (sticky at top of softail forum)
> Gunmetal Gray metallic paint from House of Kolor
> ol school HD tank badges
> custom seat by local upholstery shop, alcantara suede with plain Italian leather
> Andrews 57h cams
> stock 46mm throttle body bored to 50mm, 4.9 screaming eagle injectors (any softail / dyna 46mm throttle body from 2007-up will work). had the boring service done by George at www.maxbore.com for $125
> Powervision tuner with Target Tune wide band add on
> Racetech 1.0kg fork springs with Ricor Intiminator dampers, 5w fork oil. (sticky at top of softail forum)
> Progressive 422 rear shocks lowered 1.25" (but I don't really like them)
> micro stealth front led turn signal bulbs from amazon / JDM ASTAR - there is a thread on this in the softail section here "$22 diy turn signals"
> 3M carbon fiber vinyl wrap on tank dash and fork upper tubes
> black powdercoated rear fender struts, black painted rear turn signal housings, lots of various bolt heads painted black
> black headlight housing trim ring (ebay)
> spike front axle cap nut covers (ebay)
> knurled design gunmetal HD grips and front pegs
> Rizoma Circuit 851 mirrors (got the idea from some custom BO's on thunderbike.de website)
Jeremy
I was wanting to know how you installed the rizoma custom mirrors. I got a set for my 2016 breakout and the screw it came with is too thick and too short to fit on my bike. Appreciate any help or suggestions.
> VH Big Radius 2-2 pipes with BCT baffles
> PM wheels
> Pirelli night dragon tires
> EBC HH front brake pads
> Arlen Ness 70t rear pulley and triglide 30t front pulley (sticky at top of softail forum)
> Gunmetal Gray metallic paint from House of Kolor
> ol school HD tank badges
> custom seat by local upholstery shop, alcantara suede with plain Italian leather
> Andrews 57h cams
> stock 46mm throttle body bored to 50mm, 4.9 screaming eagle injectors (any softail / dyna 46mm throttle body from 2007-up will work). had the boring service done by George at www.maxbore.com for $125
> Powervision tuner with Target Tune wide band add on
> Racetech 1.0kg fork springs with Ricor Intiminator dampers, 5w fork oil. (sticky at top of softail forum)
> Progressive 422 rear shocks lowered 1.25" (but I don't really like them)
> micro stealth front led turn signal bulbs from amazon / JDM ASTAR - there is a thread on this in the softail section here "$22 diy turn signals"
> 3M carbon fiber vinyl wrap on tank dash and fork upper tubes
> black powdercoated rear fender struts, black painted rear turn signal housings, lots of various bolt heads painted black
> black headlight housing trim ring (ebay)
> spike front axle cap nut covers (ebay)
> knurled design gunmetal HD grips and front pegs
> Rizoma Circuit 851 mirrors (got the idea from some custom BO's on thunderbike.de website)
Jeremy