well known to many that the V&H power dual X cover can contact on right turns, esp if the suspension is compressed- like a dip in the curve.

this can relieve traction to the rear wheel causing a slide

you'll also want to remove the excess threaded rod from your clamp...whoever installed did it "the easy way" rather than orient it so that it won;t hit.

mike

 

Dealer did it and yes it slid. Bike was sold so no worries

 

I have scraped my bottom pipe on my dresser duals. This was from making right hand turns. V&H are proud of there heat shields, didn't replace. The only time I scraped my crossover pipe was going from a pull off back up on the road and the drop off was more than expected and grabbed the bolt mainly on the clamp. Must have other issues

 

except for the next Guy....


Mike