Distance till empty
Thread Starter
|
Cruiser
Joined: Oct 2013
Posts: 234
Likes: 3
From: ontario
Distance till empty
I recently put se 204 cams and power vision target tune in last week in my 08 sg
Now I'm having problems with the fuel gauge bouncing around like crazy and the distance till empty is way off anyone have any advice on how to reset or will it correct itself over a few tanks of gas?
James
Now I'm having problems with the fuel gauge bouncing around like crazy and the distance till empty is way off anyone have any advice on how to reset or will it correct itself over a few tanks of gas?
James
Road Warrior
Joined: Nov 2007
Posts: 1,800
Likes: 307
From: Houston, Texas
If the fuel gauge is bouncing without the bike moving, you have a bad connection or short somewhere in the circuit. That's not going to fix itself. Check the electrical connections in the tank. Not a cure all but try using a little dielectric grease on all the plugs. If the tank was removed for the cam install, a connector may be loose, broken or corroded.
Club Member
Joined: Jun 2007
Posts: 45,429
Likes: 2,898
From: Bedford UK
I agree with Edward, the good news is there is nothing fundamentally wrong, the bad news is that you probably have a simple connector problem to chase down and fix. May be as simple as a chafed wire causing a false ground.
Thread
Thread Starter
Forum
Replies
Last Post
Gilbert R Rasco
Softail Models
1
Sep 3, 2018 06:57 AM
