Help with a primary fluid change
Road Warrior
Joined: Jun 2006
Posts: 1,553
Likes: 0
From: Lebanon, Missouri
RE: Help with a primary fluid change
ORIGINAL: jammer25309
I have an '07 Electraglide. At first I always removed the passenger floorboard to get to the T-27 torx screw on the derby cover near the passenger floorboard, but then I found that all I had to do was loosen the bolt on the mount for the floorboard to the point I could swing the floorboard out of the way to get to that last derby cover torx screw.
[align=center]
[/align]
I have an '07 Electraglide. At first I always removed the passenger floorboard to get to the T-27 torx screw on the derby cover near the passenger floorboard, but then I found that all I had to do was loosen the bolt on the mount for the floorboard to the point I could swing the floorboard out of the way to get to that last derby cover torx screw.
[align=center]
[/align]
Road Captain
Joined: Jan 2006
Posts: 508
Likes: 14
From: Tallahassee
RE: Help with a primary fluid change
That will not work with Bub cross dresser duals.
Doug
Doug
ORIGINAL: jammer25309
I have an '07 Electraglide. At first I always removed the passenger floorboard to get to the T-27 torx screw on the derby cover near the passenger floorboard, but then I found that all I had to do was loosen the bolt on the mount for the floorboard to the point I could swing the floorboard out of the way to get to that last derby cover torx screw.
[align=center][/align][align=center][/align][align=center][/align]
I have an '07 Electraglide. At first I always removed the passenger floorboard to get to the T-27 torx screw on the derby cover near the passenger floorboard, but then I found that all I had to do was loosen the bolt on the mount for the floorboard to the point I could swing the floorboard out of the way to get to that last derby cover torx screw.
[align=center]
[/align][align=center][/align][align=center][/align]
Thread
Thread Starter
Forum
Replies
Last Post
