IDS Install
Grand HDF Member
Joined: May 2006
Posts: 4,366
Likes: 3,650
From: SE NC
RE: IDS Install
ORIGINAL: hennyk
Having a IDS installed on my EGC tomorrow hope it is all what they say it is.
Having a IDS installed on my EGC tomorrow hope it is all what they say it is.
Oh, and the most important question, is it a warranty/recall thing? And should I ask the dealer who I am bout to get this RK from about it??
Thanks.
Intermediate
Joined: Mar 2007
Posts: 26
Likes: 0
RE: IDS Install
I got the Thundermax with Autotune At M&M Cycle in Sandusky Ohio. Makes the bike run like it's suposed to.
Everything Plugs in, no wire splicing, replaces the factory ECM. The Tech support at Zippers is very good. Hooked it all up myself, then called them to make sure I had everything right and it fired right up. The motor ran smoother imeadiatley. The guy at Zippers was very paitient with me and talked thru the whole process of loading the map,etc. Took about maybe 20 minutes on the phone. Couldn't be happier withit. I wish I would have put this on from day one. Probably better for the motor, i'm sure.
Everything Plugs in, no wire splicing, replaces the factory ECM. The Tech support at Zippers is very good. Hooked it all up myself, then called them to make sure I had everything right and it fired right up. The motor ran smoother imeadiatley. The guy at Zippers was very paitient with me and talked thru the whole process of loading the map,etc. Took about maybe 20 minutes on the phone. Couldn't be happier withit. I wish I would have put this on from day one. Probably better for the motor, i'm sure.
Cruiser
Joined: Jun 2007
Posts: 181
Likes: 0
From: Peculiar, MO
RE: IDS Install
https://www.hdforums.com/m_2317027/mpage_1/key_/tm.htm#
Here is the elbow grease sheet. The date is incorrect but a valid program.
Here is the elbow grease sheet. The date is incorrect but a valid program.
Thread
Thread Starter
Forum
Replies
Last Post
