When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm looking for a good picture of the *** end of the 2010 Street Glide. Unfortunately, I can not bring up the HD website nor find a good pic anywhere on the internet. I'm deployed and have limited internet access (and what I do have is slow as poop).
I'm really looking forward to getting home and doing some more mods to my '09, including cleaning up the rear fender/taillight. I thought maybe the 2010 assy might be what I'm looking for. Anyone have a good pic?
If I was you, I'd find a different alternative anyway.....That bar kind of floating there looks a little out of place to me.....I remember when I was deployed, the 08s had just come out and we were all trying to get the HD site to load, it was also "slow as poop"
So, it's just blinkers with run/brake/blinker, huh? I doubt it will work with an '09 (fender) and with the Kuryakyn curved plate holder.
It is a little more than that. There are LED's and an incandescent bulb in the signal assemblies. The LED's are on the outside of the assembly and I think work as turns while the incandescent bulb works as run and brake. Or something along those lines.
It is a little more than that. There are LED's and an incandescent bulb in the signal assemblies. The LED's are on the outside of the assembly and I think work as turns while the incandescent bulb works as run and brake. Or something along those lines.
It's still butt ugly...whatever it is.
Harley should use the SE turn signal setup and remove that bar altogether.
There is also a large gap between the back of the turn signal bar and the fender. The gap used to be concealed by the tail light; probably on the order of 3/8" or so gap at its widest.
I was at my local HD store yesterday and took a bunch of pics of new 2010's (black denim FLHX, scarlet red FLTRX, black FLXXX, ect.) and noticed that butt ugly gap on the black denim FLHX. Haven't located my cable since returning from bike trip vacation so I haven't been able to transfer the pics to the computer yet.
I'm still laughing.....they took away one of the exhaust pipes!!!
It looks so dumb. If I was following a 2010 I'd tell him one of your pipes just fell off!!!! And removing the "Harley brake light"...come on Willie!! What the F#$%?
Real bad move for one of HD's big street bikes. This aint a sportster..
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.