Help - Want to add "spot" switch
Thread Starter
|
Road Captain
Joined: Apr 2010
Posts: 585
Likes: 3
From: Holland, Ohio
Thanks for all the help. Got the switch that I wanted (part number is 71505-96). Next is to get the lamps and get it all wired up. The instructions for the aux. passing lamp kit looks like it has all the information I need.
Road Warrior
Joined: Jan 2006
Posts: 1,286
Likes: 17
From: Omaha
I forgot to mention earlier that you will need a couple of pins to plug the wires from the lights into the signal connector. Your dealer should have them and should know which ones you need (they are the square ones).
Thread Starter
|
Road Captain
Joined: Apr 2010
Posts: 585
Likes: 3
From: Holland, Ohio
Last edited by KutenFLHX; Jul 17, 2010 at 05:43 PM.
Thread Starter
|
Road Captain
Joined: Apr 2010
Posts: 585
Likes: 3
From: Holland, Ohio
I've decided against the Kuryakyn light kit and am going to go with the Harley Custom Auxiliary Lighting Bracket kit instead. One question though: there are 2 connectors on the bulb, but only one wire (grey) is run through the lamp housing to the turn signal connector; where/how is the other connection on the bulb connected to? Is a wire run from the bulb to ground screw in the lamp housing?
Thanks for all the help/information. I've gotten more useful information from this forum than from the Harley instruction sheets.
Thanks for all the help/information. I've gotten more useful information from this forum than from the Harley instruction sheets.
Thread
Thread Starter
Forum
Replies
Last Post
DrPlastic
Touring Models
9
Sep 17, 2008 05:07 PM
