Stock CAM Bearings
Thread Starter
|
Road Warrior
Joined: May 2010
Posts: 1,294
Likes: 1
From: South FL
Thanks MUCH everyone!
That makes me feel a lot better, because I don't want to be stranded in the middle of no where during my crossing the country (route 66) this year.
I am studying of how to replace the CAM, and I have ordered most of the tools, parts, but the last thing I need is the guts to do the "open heart".
I wish I know more!
That makes me feel a lot better, because I don't want to be stranded in the middle of no where during my crossing the country (route 66) this year.
I am studying of how to replace the CAM, and I have ordered most of the tools, parts, but the last thing I need is the guts to do the "open heart".
I wish I know more!
Thread Starter
|
Road Warrior
Joined: May 2010
Posts: 1,294
Likes: 1
From: South FL
BTW. What is your MPG after all the mods?
Elite HDF Member
Joined: Jun 2007
Posts: 3,873
Likes: 13
From: NW Arkansas
Thanks MUCH everyone!
That makes me feel a lot better, because I don't want to be stranded in the middle of no where during my crossing the country (route 66) this year.
I am studying of how to replace the CAM, and I have ordered most of the tools, parts, but the last thing I need is the guts to do the "open heart".
I wish I know more!
That makes me feel a lot better, because I don't want to be stranded in the middle of no where during my crossing the country (route 66) this year.
I am studying of how to replace the CAM, and I have ordered most of the tools, parts, but the last thing I need is the guts to do the "open heart".
I wish I know more!
You can PM me or probably the two whose links I referenced below for help if you have questions. Oh yeah one slight problem, I have my cams in but due to other issues I haven't started it yet........so I only think I did it right!!!
https://www.hdforums.com/forum/touri...-write-up.html
https://www.hdforums.com/forum/touri...ge-report.html
Thread Starter
|
Road Warrior
Joined: May 2010
Posts: 1,294
Likes: 1
From: South FL
Check out the two links below and have your service manual open. I too was hesitant to change mine but it really wasn't all that bad, with a little help from my friends!
You can PM me or probably the two whose links I referenced below for help if you have questions. Oh yeah one slight problem, I have my cams in but due to other issues I haven't started it yet........so I only think I did it right!!!
https://www.hdforums.com/forum/touri...-write-up.html
https://www.hdforums.com/forum/touri...ge-report.html
You can PM me or probably the two whose links I referenced below for help if you have questions. Oh yeah one slight problem, I have my cams in but due to other issues I haven't started it yet........so I only think I did it right!!!
https://www.hdforums.com/forum/touri...-write-up.html
https://www.hdforums.com/forum/touri...ge-report.html
I will need to make time, and decide whether I will keep the stock push rods, or go with the adjustable ones.
I have read somewhere that it is not hard to keep the stock push rods. I have to look more in this option.
Thread
Thread Starter
Forum
Replies
Last Post
superderrick
Engine Mechanical Topics
6
Oct 5, 2014 10:38 AM
