6th gear indicator

Reply Subscribe

Thread Tools

Search this Thread

Nov 9, 2011 | 12:18 AM

#21

JCCASH

Cruiser

Joined: Oct 2011

Posts: 112

Likes: 0

From: Longwood, Florida

Quote:

Originally Posted by wlibert

You can get one from Harley that mounts on the handlebars on the right side that shows all gears as long as the clutch is out. I have it on my bike.

What's the part number?

Nov 9, 2011 | 06:19 AM

#22

wachuko

Outstanding HDF Member

Joined: Jan 2011

Posts: 2,333

Likes: 77

From: Orlando, FL

Quote:

Originally Posted by JCCASH

What's the part number?

Black
http://www.harley-davidson.com/gma/g...bmLocale=en_US

Chrome

http://www.harley-davidson.com/gma/g...bmLocale=en_US

Nov 9, 2011 | 06:32 AM

#23

JayStronghawk

Ultimate HDF Member

Joined: Dec 2007

Posts: 9,254

Likes: 283

From: Lake City, Florida (Native)

Quote:

Originally Posted by StGliderHD

Mine did that as well when I updated the firmware of my Power Commander. Doesn't allow you to use cruise control. I haven't updated the firmware to the October 2011 release yet to see if it fixes mine. One can only hope it will.

Had this happen twice with mine have a PCV and if the 6 Goes out, So does Cruise, but both times it happened after stopping and starting back up again no more problems .. Been at least 6 months now since done it .. Now that posted this will probably do it again ..

Nov 9, 2011 | 09:17 AM

#24

Bigiron

Tourer

Joined: Sep 2006

Posts: 361

Likes: 3

From: Nashville, TN

My 6th gear light and Cruise Control became erratic after installing a PCV. The cure is to go into the Power Commander with a laptop, go to the Power Commander Tools Menu, click on To Configure Harley ECM Data. There will be a check box to the left of Diagnostic Port Enabled. Uncheck the box. Click OK to accept the change. Worked for me.