So if you put on 11.5', do you also want to lower the front like an inch? And has anybody used the 11.5' progressives from http://www.acmpartsonline.net/ ? I guess the guy said that they just don't have the chromed cap on the bottom and they are only $160 shipped. They are apparently specially made for him and use the exact same parts as the standard ones.

http://mawonline.com/progress.htm#Fo...owering%20kits ---- fork lowering kits for harley's $70, towards the bottom of the page.

http://cgi.ebay.com/ebaymotors/PROGR...spagenameZWD1V --- 440's for $160 (ebay # 140015534795)

 

I have seen the 440's on Ebay,but you really need to know how they are set up.After talking to Proggresive,for them to do what you need they need the weights of rider or riders.

 

I pretty much am in the same situation as Matt8643. So I'm sure the 440's in the standard would be fine.

 

I saw some 440's on Ebay parts number 4404053c, say's they should flh models...anybody know if they would fit streetglide?

 

Go to http://mawonline.com/progress.htm#Fo...owering%20kits
scroll down to Progressive 440 IAS Series Crusier Shocks
click more info (http://www.powersportrider.com/CGI-B...5C&catpage=299)
take the last 2 numbers for the parts you need
go back to the main page and it should be the last 2 digits for the MFG #.
B is for black scroll down and you will see C which is for chrome.

...at least...this is how I understand it