Permanent Tour Pak mount for EG Standard
Thread Starter
|
Cruiser
Joined: Nov 2006
Posts: 195
Likes: 0
From: Boston, MA
Permanent Tour Pak mount for EG Standard
Just ordered off Ebay a used take-off permanent tour pak mount (like on aclassic or UC) for my 2005 EG standard. What, if any nuts/bolts hardware doI need to mount this rack to the bike? I know I should have thought of this before hand but...
Thanks
Thanks
Road Master
Joined: May 2005
Posts: 1,004
Likes: 2
From: somewhere
RE: Permanent Tour Pak mount for EG Standard
Not to give a short answer...i dont have my parts book with me. Call the HD dealer parts counter and have then look up the hardware for the rack. The nuts/bolts are on the same page as the actual rack. You might be able to get a list of the sizes and then go to Lowes/Home depot and get stainless steel HW or get the chrome HW aftermarket to save a few $$$. If i remember correctly, there are only a small handful of nuts/bolts needed..nothing out of the ordinary.
RE: Permanent Tour Pak mount for EG Standard
You can go to www.bikebandit.com and click on OEM parts then choose Harley-Davidson then your year and the rest. You will get a parts list that you can choose from. I was just looking and noticed that there list is falling behind. They only have up to 2002 and the last place that I was able to find an FLHTCU was 1999. I don't know if there has been any real change between now and then so you may be able to refer to it and get the information that you need. Otherwise the dealer should be able to fix you up.
Thread Starter
|
Cruiser
Joined: Nov 2006
Posts: 195
Likes: 0
From: Boston, MA
RE: Permanent Tour Pak mount for EG Standard
Thanks for the replies. I have a call into the H-D dealer. He's goingto look it up for me when he gets a quiet moment but I'll check bikebandit.com next.
Again, Thanks..
Again, Thanks..
Thread
Thread Starter
Forum
Replies
Last Post
davedyna
Touring Models
5
Apr 19, 2012 06:12 PM
