When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Today I noticed that only the left side is secured holding my chopped Tour pack on, the right side wasnt snapped in.
I took it off and tried to re-install it, same thing, left side snaps in with ease right side wont even when I try to force it.
Everything is lined up properly.
What the heck is going on?
Thanks for your help
The docking points are slightly elliptical. Loosen the screw and rotate the docking point. They have a mark on them, can't remember which way is the wide side. It's in the instructions how to adjust them as well.
The docking points are slightly elliptical. Loosen the screw and rotate the docking point. They have a mark on them, can't remember which way is the wide side. It's in the instructions how to adjust them as well.
Thanks. Come to think about it the one on the left that snaps right in I noticed the docking point notch was visible but the one on the right Im having the issue with was not.
Should those rotate easily after I loosen the screw?
Thanks
Thanks. Come to think about it the one on the left that snaps right in I noticed the docking point notch was visible but the one on the right Im having the issue with was not.
Should those rotate easily after I loosen the screw?
Thanks
Read the directions...Sacrilege! I too am having the same problem...would have probably been easier to 'read the directions' but I came on here and searched instead. Must be a biker thing.
Read the directions...Sacrilege! I too am having the same problem...would have probably been easier to 'read the directions' but I came on here and searched instead. Must be a biker thing.
it's a man thing we dont need to stinkin instructions we can figure it out or go to the forum and ask...
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.