When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am new to this forum, but Ive been searching for a while and cannot find my specific issue. So I apologize if this exact subject has been beaten to death before. If so, can someone post a link to it.
I bought a Stinger spx700x4 , 4x MMats Pro 601cx 6.5 speakers with rings and grilles, a BT Line levellor, and advanblack lower fairings. I have been trying to get my mechanic to install them since December. He has been too busy. Im going to try this myself. I am not stupid, also not a professional.
Does anyone have a step by step videos or instructions on how to do this install? I have seen many videos online for other brands which have different parts and ports than my setup. I am trying to replace my upper fairing speakers and install speakers in my new lower fairings. Also, my speakers fit in the advanblack speaker pods (upside down?) however, both the rings and grills do not. The grill can be jammed in there pretty tight but I think vibration over time while leave them on the road somewhere. Also, they Are Going to leave scratches in the paint.
i am trying to get this done before I put the XK Glow on this Saturday. Thanks guys
Last edited by BigEasy816; Mar 19, 2020 at 04:37 PM.
I did a fairing only install. Maybe this will help with that much of it.
Thats great except there are 6 input RCAs on the Stinger. 2 for front and 2 for rear inputs, and 2 for line input. I know not to use line input. Since I am installing lower fairing speakers also, do I need to use these Rear input RCA? If so, how? The BT355 only has 2 RCA outputs.
Last edited by BigEasy816; Mar 19, 2020 at 10:38 PM.
Thats great except there are 6 input RCAs on the Stinger. 2 for front and 2 for rear inputs, and 2 for line input. I know not to use line input. Since I am installing lower fairing speakers also, do I need to use these Rear input RCA? If so, how? The BT355 only has 2 RCA outputs.
Its my understanding that if youre doing 4 channels youll need another BT355 specifically for your rear or lower speakers in this case.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.