CGGorman's 99 Wide Glide build thread

where'd these breather banjos come from. i want to replace mine with something like these or with a nipple to run to a filter. i think the blow by on my sporty is messing with my tps. and i want to do the same on my dyna.
No banjos in that pic. They're just breather bolts from Lowbrow Customs. He's got several styles. I looked high and low for some that weren't too flashy AND were made of steel. I knew I was hanging some weight (so to speak) on them and didn't want to worry about aluminum fatiguing.
http://www.lowbrowcustoms.com/
http://www.lowbrowcustoms.com/
Except for a few pieces... Kuryakyn and Klutter could be used interchangeably...imo, of course
Yeah. I took about 50 lbs (no exaggeration) of chrome off this bike. A lot of it was Kury. Practically the entire engine/trans was covered in it. No wonder the PO had to install an oil cooler. Poor thing was suffocating in a blanket of stagnant air covered with chrome.
Sorry, I've been slacking. Between the recent heat wave, son's graduation, and the holiday, I haven't been real available or motivated.
I promise the bike isn't really anything that special. HrdNox's bike makes mine look like garbage! Mine is a mismatched mess this season, or until I can scrape together the parts for the front half. Even when I roll it out of the garage this season, it'll still only be about half done.
I got the bars mostly done: https://www.hdforums.com/forum/dyna-...onnectors.html
Hopefully it's not too hot in the garage tonight and I can get them finished. I'll snap some pics regardless.
I did get a new helmet and made a basic mod to it...
I promise the bike isn't really anything that special. HrdNox's bike makes mine look like garbage! Mine is a mismatched mess this season, or until I can scrape together the parts for the front half. Even when I roll it out of the garage this season, it'll still only be about half done.
I got the bars mostly done: https://www.hdforums.com/forum/dyna-...onnectors.html
Hopefully it's not too hot in the garage tonight and I can get them finished. I'll snap some pics regardless.
I did get a new helmet and made a basic mod to it...
Last edited by cggorman; Sep 7, 2017 at 11:10 PM.
You guys probably can't use "swamp" coolers (evaporative coolers) out there in Ohio...huh?








