When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dyna Glide ModelsSuper Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
Maybe if I ditch the rubber mounts, it will feel more solid. The bars move almost an inch forward and back with the rubbers on the mounts.
Man! thats alot of movement. I have the 2" spacers under my stock set-up and I get just a small amount of movement. I am planning to go to solid mounts in the future. I have to admit, before I got my bike I used to see bike with apes and think how ridiculous it looked. Now I'm hooked! I love'em that way. Shoulder high or just below, not way above. Now I saw a sporty the other day with some huge bars. That made me chuckle.
I think it all depends on the rider .... what's good for one wont be for another. I've got mini-apes over 3.5" straight risers and my bars are perfect for me. I suppose they would equal the same height as 12.5" apes. I do believe that poly bushings are a must .... they took all the mush out of my bike. And, having ridden a bros '06 Lowrider many times, I do like the feel of my set-up better. I've thought I might try Heritage bars .... as there would be no cable swap, but I like mine enough to stay where I am. The only way I'd change is if I was going for a complete different look on my ride.
Bucket ... look at some Wild1 507's .... drags that are a little higher .... you might like those and they wouldnt require any new cables I dont think.
Maybe if I ditch the rubber mounts, it will feel more solid. The bars move almost an inch forward and back with the rubbers on the mounts.
Any sugestions... do they make polyurethane bushings instead of rubber, or something of that nature?
Hey Bucketass, if you want to stiffen up the bars, I installed the Wild1 thick risers and it made a world of difference, and that is with the stock bushings, plus they look much beefier. You can see them on my mods page on my web site.
Hey Bucketass, if you want to stiffen up the bars, I installed the Wild1 thick risers and it made a world of difference, and that is with the stock bushings, plus they look much beefier. You can see them on my mods page on my web site.
Why do I have what on my bike - "Mini-Apes"? That's a Harley term. I imagine if I wanted drag bars for my bike, and ordered them from Harley, I could just ask for a set of "Flat Apes".
As for why I have those particular bars on my bike. That's what it came with. Had it come with real apes, I would have taken them off, and replaced them with either mini apes or flat apes.
I agree with this statement 100%, I too suggest that anyone that states that apes are less comfortable and have less handling...have obviously NEVER ridden a bike with them.
my sig for the last 3 months showed apes on the bike....Now, I am positioned like a standard drag setup. This position allow me to feel more in control at high speeds and through corners...
the position is different, obviously. Comfort is the same for me.
I put on 18 inch apes after I bought the SG but soon it looked too large for the bike to me. I wanted something narrow, but tall...so I snagged a set of 12 inch "gimp apes" off of Ebay for about $120....yeah I'm a cheap bastard. Since they are narrow they stil look like they have height.
I have a set of drags/pull backs that are so comfortable it's insane. I highly recommend them and I think they LOOK better too...IMHO of course but...to each his own.
Last edited by HarleypsychRN; Dec 14, 2008 at 09:23 AM.
I have 16" apes with 2" riser's. At first it was sloppy with the rubber mount's. Changed it out with polyurethene mount's. Now it is tight. No movement like before.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.