Random problem when starting
Dirt don't hurt
Joined: Jan 2011
Posts: 21,062
Likes: 4,547
From: Haslet Texas
As for the butane pen torch, all the joints in the jumper wire to be soldered would be right on top of the battery for us.
Not a place I want to be soldering with a butane pen torch.
Thread Starter
|
Cruiser
Joined: Nov 2009
Posts: 122
Likes: 2
From: Spain
I´d like to have one like the Weller:
Cheers,
Last edited by Nostalgia_93; Jul 26, 2012 at 10:01 AM.
Thread Starter
|
Cruiser
Joined: Nov 2009
Posts: 122
Likes: 2
From: Spain
Hi guys!
Very hectic here during these days! will install the wire as soon as I have some free time to do it real soon.
Here's the prepared wire, I added a double layer of thermoretractable tube in the center to make the union even more rigid and secure.
No mystery here, but will let you know how it went when installed :-)
Cheers,
Very hectic here during these days! will install the wire as soon as I have some free time to do it real soon.
Here's the prepared wire, I added a double layer of thermoretractable tube in the center to make the union even more rigid and secure.
No mystery here, but will let you know how it went when installed :-)
Cheers,
Thread Starter
|
Cruiser
Joined: Nov 2009
Posts: 122
Likes: 2
From: Spain
Thanks miacycles!
It's naked because it'll be inserted substituting the actual 30 spade connector on the plastic block piece that connects to the relay, as explained by texas ;-)
Cheers,
It's naked because it'll be inserted substituting the actual 30 spade connector on the plastic block piece that connects to the relay, as explained by texas ;-)
Cheers,
Dirt don't hurt
Joined: Jan 2011
Posts: 21,062
Likes: 4,547
From: Haslet Texas
Hi guys!
Very hectic here during these days! will install the wire as soon as I have some free time to do it real soon.
Here's the prepared wire, I added a double layer of thermoretractable tube in the center to make the union even more rigid and secure.
No mystery here, but will let you know how it went when installed :-)
Cheers,
Very hectic here during these days! will install the wire as soon as I have some free time to do it real soon.
Here's the prepared wire, I added a double layer of thermoretractable tube in the center to make the union even more rigid and secure.
No mystery here, but will let you know how it went when installed :-)
Cheers,
Thread Starter
|
Cruiser
Joined: Nov 2009
Posts: 122
Likes: 2
From: Spain
I'll do it, thanks!
Elite HDF Member
Joined: Sep 2007
Posts: 4,468
Likes: 12
From: Bluffton, South Carolina
John
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
The Best and Worst Harley-Davidson Moves of 2025
Verdad Gallardo
Thread Starter
|
Cruiser
Joined: Nov 2009
Posts: 122
Likes: 2
From: Spain
Hi guys!
Just installed the wire and all went great, the bike starts better than ever. Feels like it has gained more strenght and a few fractions of a second in the starting process.
Following picture shows the removed 30' spade connector before insulation, thanks Texas!
Thank you very much D1gger, Texas, Gunslingertom, miacycles and all of you guys helping out!
Cheers,
Thanks, it worked! About the gauge, don't know, but it was rather thick, equal as the wire that came with the fuse holder showed in the previous picture I posted:
Just installed the wire and all went great, the bike starts better than ever. Feels like it has gained more strenght and a few fractions of a second in the starting process.
Following picture shows the removed 30' spade connector before insulation, thanks Texas!
Thank you very much D1gger, Texas, Gunslingertom, miacycles and all of you guys helping out!
Cheers,
Last edited by Nostalgia_93; Aug 4, 2012 at 03:24 AM.
Thread
Thread Starter
Forum
Replies
Last Post
