No Mo EFI
Thread Starter
|
Ultimate HDF Member
Joined: May 2006
Posts: 6,590
Likes: 444
From: Ohio
EFI stripped off, single fire coil swapped in, harness in place, manifold on. Tomorrow carb and a lot of fretting over wiring. I guess I need to get the connector to hook the Ultima ignition into the harness.
Road Captain
Joined: Oct 2009
Posts: 701
Likes: 1
From: The Great Southwest Desert
The one convenience part yet to be mentioned is the bracket that bolts to the top motor mount and holds the VOES and enrichener. I did the swap without and made a hanger for the enrichener. Later in, I was given a bracket and installed it. Nicer and cleaner installation and look.
Intermediate
Joined: Feb 2013
Posts: 26
Likes: 0
From: petawawa on
hey guys my 98 flhtpolice evo died last week I'm gonna replace it with an other engine with carbright now all my plug are just lying around didnt look at it to much yet but is there a pic by pic thread somewhere that i could follow......i didnt really want to buy harness i wanted to just rip off what ever was not required the new engine come with ign...i just need to wire it in but not sure on what i can rip off..
thanks in advance
thanks in advance
Seasoned HDF Member
Joined: Aug 2008
Posts: 5,081
Likes: 2,159
From: Ohio
The plug and play harness for the Evo is a non production item currently, can find them used on Ebay off used bikes, several use the Twinkie harness and alter a couple of wires to make it work.
4th Gear
Joined: May 2008
Posts: 8
Likes: 0
Can one of you guys tell me why my 97 injected ultra has a 3 wire coil? that is to say it has 2 plug bosses, and 3 leads going to it. is one for the tach.? and can said coil be used with a crane hi-4 ignition module? going thru the e.f.i. to carb swap myself now. This and the tank are the only things left. oh, and the v.o.e.s. Thanks for any help you can offer. (nice handle, by the way)
Thread Starter
|
Ultimate HDF Member
Joined: May 2006
Posts: 6,590
Likes: 444
From: Ohio
Can one of you guys tell me why my 97 injected ultra has a 3 wire coil? that is to say it has 2 plug bosses, and 3 leads going to it. is one for the tach.? and can said coil be used with a crane hi-4 ignition module? going thru the e.f.i. to carb swap myself now. This and the tank are the only things left. oh, and the v.o.e.s. Thanks for any help you can offer. (nice handle, by the way)
BTW, I'll be swapping my Ultima coil for an S&S unit tomorrow.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Road Master
Joined: Nov 2012
Posts: 794
Likes: 1
From: Alvin TX
WHYAR e ya'll changing the tanks for ? I did the swap on my 03 twinkie & just pulled it all out of the tank except the float for fuel gauge & bought a pet **** /fule valve from drag specials $25 , best mod I did for the TC ,Now I just have my EVO carb softie 
PS Cv performance.com sell a chock cable holder/bracket that bolts to the carb just move your cable over to the right side /carb side & mount it you just pull it up
PS Cv performance.com sell a chock cable holder/bracket that bolts to the carb just move your cable over to the right side /carb side & mount it you just pull it up
Last edited by cowboy 51; Dec 19, 2013 at 11:10 PM.
